Jump to content
Corsair Community

deathbox85

Members
  • Posts

    10
  • Joined

Everything posted by deathbox85

  1. Hi, My RTX 2080Ti is no longer recognised on Windows 11 since upgrade. everything else but my sdd's is recognised.
  2. Since the latest update, I can no longer control the Pump speed on my XD7. It shows and runs at the last setting, if I can disconnect it from my Commander Pro it runs at full speed as expected. All firmware is upto date. Anyone got any ideas?
  3. Hi guys, So had a reply from corsair I did the above along with a clean install and now works perfectly. Just had to re-add my settings as i didn't export them. I had been hot swapping USB headers I thought i might have bricked it but no. its all working fine. hope this helps anyone else Cheers,
  4. It may have to be RMA to Amazon. I'll wait and see what Corsair come back with, as that's all Amazon will ask me to do if I try to return as faulty. Cheers for your help
  5. Yeah using the correct USB header, USB15 is the shared one. Tried the repair on iCue, same result. I'll open a ticket with Corsair directly and see what they say. I guess the only benefit that atleast they're running at full to keep the case quiet. Cheers for your help
  6. OK, so tried 'external' usb, still the same and resetting via the pin reset resulted in the same issue. all fans run at full regardless.
  7. I've tried the custom curves and setting RPM to constant speed/%. Again same issue. CP seems to still be intact and not bricked, atleast usb hub is still working for H150i and LNP. My mobo is X470 but updated to run 3k series CPU. I will try with an old USB hub from the same header and see what happens ***Edit*** Same issue when using hub as intermediary as same header
  8. I've tried the custom curves and setting RPM to constant speed/%. Again same issue. CP seems to still be intact and not bricked, atleast usb hub is still working for H150i and LNP. My mobo is X470 but updated to run 3k series CPU. I will try with an old USB hub from the same header and see what happens
  9. Fans are default which i assume is CPU package. I've tried repair on installation, same issue. Asus Crosshair VII Hero x470, I have 2 USB headers. both have been tried and have same result.
  10. First i'll start with an apology if this not the correct area but i cant find a specific discussion for CP. Installed CP today to get away from using Asus AI Suite for case fan control and use iCue. I have H150i pro and LNP connected to my CP. I can control the fan speeds fine for my H150i and LP works fine too. My fans just run at full speed through CP. I've tried the following: Force updating firmware (v0.9.212) - It hangs at 0% constantly Reinstalling iCue (v3.26.95) any help/advice would be great Cheers,
×
×
  • Create New...