Jump to content

Creaze

Members
  • Posts

    12
  • Joined

Everything posted by Creaze

  1. I'm sorry I don't quite understand what you're saying. Are you saying that I should tilt my case backwards so all of the liquid flows to the coolant lines? are you also saying that once I get the air bubbles out it will cease to be a problem??
  2. Hi all, I've recently put together my entire build and I have my radiator positioned at the top of my case with the fans pushing air out of the case. When powered on and in an upright position I hear a low humming noise coming from the pump/coolant lines, almost like there are tiny micro air bubbles trapped inside or something. Prior to this I tested all of my components outside of the case where the motherboard was laying flat on the motherboard box. When I turned it on I noticed no noise from the pump, it was virtually silent. I remembered this when I had my tower upright so I decided to lay the case flat on the table and found that the noise slowly disappeared the closer the pump got to a horizontal position. Any thoughts or comments on a similar experience and what I can do to resolve it? I'm hoping I don't have to return it because I just put it all together. Also note that in the bios, I noticed that cpu temperatures were totally fine, idling around 30 degrees Celsius. Thanks for any help!
  3. Okay, gotcha, thanks for the reply! Yeha I might return the LL140 and get ML140 non rgb for the front of my case because I dont really like the asymmetrical lighting ring look coming through the mesh of the meshify c, but that's just a personal preference. I've also heard that you can't turn off the rgb for the LL series which is a huge downside in my opinion, but again just a personal opinion.
  4. Also, one last question, with the LL fans once you load a preset of colors can you use that preset as the default and close iCUE? Once you close it will the fans remain on that preset and always default to that preset even when you turn your computer off/on or restart it?
  5. Okay thanks, that'd good to know! Oh wow you have a lot of products running from it, so that is definitely comforting for me.
  6. I am planning on having many corsair rgb products in my upcoming build but after reading through threads it seems like many people have issues with iCUE software and its high processing usage? I have x3LL fans and vengeance pro rgb ram.
  7. Awesome, thanks for the replies, it is much appreciated!
  8. ahhh okay thats the part I was unsure about. Hmmm how am I to go about getting an rgb LED hub then if I dont want to buy a multi-pack or even an rgb set of fans? Also can I even mix and match the the 4-pin pwn connectors of different fans on the commander pro as long as they are corsair products?
  9. Oh okay great! So if I understand correctly it would work something like this... the rear LL120 3-pin rgb connector plugs into my motherboard, and the 4-pin pwm plugs into the commander pro, the AIO fans have their own connectors so I dont have to worry about plugging them into the commander pro, and finally for the x2ML140 non-rgb 4-pin pwm connectors would plug into the commander pro, therefore taking up a total of 3 fan slots on the commander pro (1 from the LL120 and 2 from the x2ML140). With this setup I would be able to control the rgb and fan speed of each fan?
  10. Currently I have x2LL140 as intake fans at the front of my Meshify C case. I'm thinking about returning them and getting the ML140 non-rgb version as I've heard they are better? Can someone with experience let me know if it is worth it to replace them or just stick with the LLs? I have a couple of the LL120 white version for the rest of my case and the specs say it has a higher rated rpm and cfm. Would it be better to use 2 or 3 LL120 white instead of the 2 LL140 at the front of my case? Thanks!
  11. So in my build im planning on having x1LL120 RGB in the rear for exhaust, x2LL120 RGB connected to the H100i AIO (I know these wont count towards the commader pro as it just connects to the cpu fan connector), and x2ML140 NON RGB in the front for intake. I have a commander pro as well to regulate all the fan speeds and lighting for the 3 rgb fans and the fan speeds for the 2 non rgb fans in iCUE. What i was wondering is even though I have 2 different fan types going into my commander pro, can i still control the speed of each individual fan as well as rgb? I've read on threads that if you have 2 different corsair fans connected to the commander pro in the same channel then you cant control rgb of individual fans, but because 2 of the 5 fans (ML series) are non rgb could i still control fan speed and rgb of each fan separately? I'm trying to go through all of this hassle because i've heard the rgb variants of the LL and ML series aren't as good as their non-rgb counterpart. In terms of noise and capacity to cool where does the rgb ML and LL series rank against the non-rgb ML and LL series rank? Thank you! I've looked through Zottys FAQ and it doesnt mention this type of setup.
×
×
  • Create New...