empirekicking

Been running the memory diagnostic text on all of my memory sticks after the system detect booting failed and the system crashed once. I have 4x 8GB sticks and I tested them one by one and one of my memory sticks has detected an error. Even that error stick still running at 3200Mhz and well, they all run at 3200Mhz. (CMW16GX4M2C3200C16) ANd so what's the option here? Stick to what I have going or send the stick back to Corsair for them to text and repair. I got the sticks back in 15 Dec 2020 Only one stick out of the 4 is failed.

Just update my system from Windows 10 to Windows 11 - Went smooth as a baby butts, so that's good in away. However the "corsair.service" is running far higher then normal, making my CPU work more then before. Even on idle it's seems to be at 30% It's still working fine as normal, but while doing heavy work or gaming, I just do not like seeing it being high. "corsair.service" with High CPU maxing my CPU at 60% to 80% - Task Manager saying mostly at 30% to 40% as for "corsair.service" Anyone can help, is there an update for the software or just a windows 11 bug or what??

Yes, It's in port three, I only put it in port 4 and that also doesn't work at the time I did it. I just turn on my pc and 120mm fan lights up. However, it's green static light. That's still in port 3. Will try port 1 out later

topic above Edited,

Hello, Lighting setup on the pro https://forum.corsair.com/v3/attachment.php?attachmentid=37412&stc=1&d=1580230828 Led RGB Strips setup https://forum.corsair.com/v3/attachment.php?attachmentid=37413&stc=1&d=1580230828 Light Channel 1 And it's also the same for 2 https://forum.corsair.com/v3/attachment.php?attachmentid=37414&stc=1&d=1580230828 Lighting Node pro is connected to the commander pro by USB cable. RGB fan hub is connected to the commander pro LED connection, using 2-pin cable. Been working for almost good 4 months, then the 120mm fan that's located on the back of the case lights stopped. Yesterday I did see, three lighting channel

Edit: I have two times LL140 and One LL120. So my two LL140 is working but my 120mm fan that's on the back of the case is not. I have the following: -commander pro -RGB Fan Hub Controller -RGB Lighting Controller My RGB strips lights are connected to the RGB lighting controller, then into the commander pro. All my fans are connected to the commander pro for powering up the speeds/spinning, Then My RGB fan connectors for the fans go to RGB Fan Hub controller then the hub into the commander pro. Two front LL140 is in slot 1 & 2 and my 120mm fan into slot 3 in the fan hub. I have tried to but my 120mm fan in different slots in the hub, 3 and 4 and nothing. Also that the lights on the 120mm do not even show up and still not detected in the Iclue. ANd that my 120mm fan is what I got over a year ago where my 140mm is only 4 months old.

Hello, Everything was working until Yesterday, until I turn on my PC this morning I noticed that my 120mm back fan was static. I updated Iclue and run allot of colours and only the two out of the three 120mm RGB fans work. On Iclue it's only detecting two fans and yet not all three, but all three fans are spinning, just the RGB light. It's weird how it just stopped. Images added. https://forum.corsair.com/v3/attachment.php?attachmentid=37408&stc=1&d=1580215185 https://forum.corsair.com/v3/attachment.php?attachmentid=37407&stc=1&d=1580215185

So my two-pin cable still able to work if it's connected to the commander pro?

I'm after a three-pin cable to connect my RGB Fan Hub Controller to the commander pro, so that all my case fans then can light up with colours. When I order the RGB Fan Hub Controller it only came as is and no other cables and it needs a three-pin and I only have two-pin cable. Looked on the parts store and nothing and so I'm stuck