Jump to content
Corsair Community

Corsair GregX

Corsair Employees
  • Posts

    269
  • Joined

Reputation

10 Good
  1. Hi! All thermal pads on the Ventus GPU block should be 1mm thick. I would suggest opening a support ticket. Our tech support will be able to assist better and proceed with additional checks to determine the origin of the issue.
  2. Yes, in the 5000 series case, you can have XD7 on front and XR5 360 on the side.
  3. 3080 Founders Edition and 3080 Ti Founders Edition have identical PCB boards. There are some differences with components, +2 GDDR6X MEM ICs, additional VRM phases, and supporting components but none of them are problematic for the 3080 FE GPU water block. Screw socket or standoff is not supposed to go through the PCB hole. Are you using any additional thermal pads except the thermal pads that are pre-installed on the GPU water block? In your image, the white pad under the backplate looks like the original one. I would suggest contacting our technical support for further assistance.
  4. Hi! Yes, 3080 Ti Strix fits the existing Hydro X Series XG7 RGB 30-SERIES STRIX GPU Water Block (3090, 3080, 3070). Compatibility lists are being updated and will be pushed live later this day.
  5. Sorry, won't fit with any of the available XG7 GPU water block models. For the quickest compatibility check, recommend using the GPU compatibility tool.
  6. Not on the (2080 FE Rev.B) New manifold design is used on newer models: 2080 Ti SE and recent NVIDIA 30-Series and RX 6900/6800.
  7. Hi, Based on this image, I think it could work. There seems to be enough width and 'depth' to fit XM2 water block. Here's additional information that might help you since you have the actual board and if you are able to take measurements with a caliper. Width of XM2 unit (with bracket) is 23mm. Required clearance under the M.2 PCB is 2.1mm.
  8. Hi Sui, Sorry to let you know that there are no plans to make a dedicated XG7 GPU water block for the AMD 6700 Reference PCB. It's not the same PCB as used on 6900/6800. For the quickest GPU compatibility check, suggest using the GPU compatibiltiy tool. https://www.corsair.com/custom-cooling-configurator/gpu-search
  9. It depends on which Ventus model you have. There are three known MSI 2080 Ti Ventus models: Ventus - compatible with both, CX-9020005-WW or CX-9020010-WW Ventus GP - compatible only with CX-9020010-WW Ventus OCV1 - not compatible with any SE has an additional cutout on the black cover to allow installation on PCBs that have a third DP connector instead of USB-C. Make sure to check on which specific Ventus model you are using.
  10. Hi! Yes, the XG7 RGB 30-SERIES VENTUS GPU Water Block (3090, 3080) is going to work with MSI 3090 and 3080 Ventus 3X models.
  11. Sorry, currently, there is no information about the potential availability of the Hydro X kit in the white version. At this point, I would suggest choosing corresponding parts in white color as a separate item from the full product list here or designing your loop with help of the Custom Cooling Configurator.
  12. Hi! I would love to help out with detailed measurements but I don't have such specific information at hand, sorry. All of the XG7 GPU water blocks come with a backplate. The 3090 FE backplate does have additional thermal pads to make contact with GDDR6X memory ICs. 2-slot IO bracket is also enclosed with the XG7 RGB 30-SERIES GPU Water Block (3090 FE). Dimensions of the 3090 FE GPU water block I do have at hand that might help with planning. Length: 210mm Width (installed on 3090 FE PCB): 161mm / original 3090 FE width is 138mm. Thickness: 2-slots FYI, all of the dimensions are taken into account when designing with Custom Cooling Configurator, suggest checking it out to validate compatibility with your case.
  13. Hi! The leaking stories about the Hydro X Series XG7 blocks are related to extreme pressure and torsion on the manifold part. Under normal use, with either soft or hardline tubing, Hydro X Series blocks will not leak. Based on thousands of happy Hydro X customers, a leaking manifold terminal is not a recurring complaint. However, we have updated the manifold and added a third screw to the manifold terminal. The new design is used on XG7 RGB 20-SERIES GPU Water Block (2080 Ti SE) and all of the new GPU water block models for NVIDIA 30-Series and AMD RX-Series.
  14. Hi! There will be a GPU water block for the new AMD graphics cards based on the reference PCB layout. The Custom Cooling Configurator and GPU compatibility tool already lists plenty of compatible GPU models.
×
×
  • Create New...