N4zroth

Yea, I replaced the first fan and everything is working again. Thanks!

I might have phrased it incorrectly. The fan which was in slot #2 before is now in slot #1 and works fine. The malfunctioning fan that was in #1 with only the inner ring working is now in #2, showing the same behavior bringing me to the conclusion that both ports of the hub are working and the fan is somewhat iffy :-)

Ok so I switched the fans around and after initially working when being plugged in, five minutes later the first fan behaves the same (only inner circle working) while the second (now in the first slot) is working fine. So I figure it should be a fan problem (which is the worst case cabling-wise) and I'll order a new one and switch it out. Thanks!

Should I try switching the two fan's order, might that help?

Hi, so my setup is this (we're only looking at the lighting part, the speed control is working fine): I have 8 LL 120 fans connected to my first Commander Pro, 4 on each channel, they are working fine. The lighting of the Corsair RAM as well as the case (1000D) are working as well, the case is connected to the first port of the case's Commander Pro. Now to the problem: I have 2 fans connected to the second port of the Commander. The lighting works fine when iCUE loads (spiral rainbow, inner and outer LED rings are changing colors as they should). After about 10-15 minutes, the outer ring of the first one stop changing colors and stays static, as well as the whole second fan. The inner ring of the first fan continues to change. After that, they aren't controllable by iCUE anymore and nothing but a complete power down will help. What am I looking at here? Is the Fan Hub corrupted? Is the first fan somehow damaged? Is it a software problem? I'm kinda lost :-/ Thanks for your help!

I have disabled that as well as quit HWInfo. Still doesn't work. Any other ideas?

yea, but I have been running that from the beginning. Perhaps a hwinfo update in the newest time? Edit: Just tried the old version with which it used to work, no change.

Hi, after the update to the newest version, the performance tab disappeared from iCue. Installing an older version doesn't fix it, the tab is gone. It only appears for the fraction of a second after restarting iCue and then disappears again. This happens every other minute. Before updating I was able to use the performance tab all the time and set my fan speeds accordingly. What's happening? How can I fix this? Thanks.