Jump to content

pandava

Members
  • Posts

    6
  • Joined

Reputation

10 Good
  1. I connected radiator fans with the splitter to one of the pump connectors (the one that doesn't lock FAN #1) and it works fine, but I can controll only FAN #2. At least some progress is made. Thanks again! Is it possible to downgrade IQUE version to older one? And check if there is some difference. IQUE screen: https://imgur.com/a/KxRE91E
  2. The version of ICUE is 3.11.114 and yea thats the one I have been using since the beggining. The fan behave locked since first time I turned on the pc after I build it. I will try the splitter today and tell the results... Would this one work? https://www.teknikproffset.se/PartnerFiles/Teknikproffset/images/products/1807407.jpg
  3. Yea it doesnt matter how I switch the connections. 1 of them is untouchable at max speed and its always Fan 1 that is locked. I did connect them to motherboard until there is another solution. thanks
  4. Thanks for the help! So when I switched one of the pump fan to motherboard the #1 that was stuck stayed as usual and other one was like you said BIOS controlled one. And IQUE didnt see him anymore. So after that I switched them again, this time IQUE doesnt see #1 anymore whitch now is bios controlled and #2 is still connected to pump and controlled through IQUE like a normal cpu fan... So the problem is kinda solved. At least temporarly. Could it be the connector defect? Screen: https://imgur.com/a/OS5BoxJ
  5. fan nr1 nop fan nr2 yes screen: https://imgur.com/a/AKuWwFk
  6. Hey there! I am kinda desparate because 1 of the H100i v2 ML 120 fans is going full speed 2700 rpm all the time... This is my first build and i cant figure out how to controll it. Other 3 fans working perfectly. I checked bios and coulndt do anything to stop it there ether. All cables are connected where they should be (I think). Pump cables - SATA with split to CPU_FAN1, usb mini cable to usb2 mobo, and 2 fan cables with rgb connected aswell... I was thinking that issue is with the CPU_FAN1 3 pin connector because on the motherboard its 4 pins and maybe thats overkill or something. MoBo: MPG Z390M GAMING EDGE AC CPU: i7 8700k screen from IQUE: https://imgur.com/a/gfUwsUs screen from corsair LINK https://imgur.com/a/cIYfNos Looking farward for some fix :)
×
×
  • Create New...