Jump to content

Nobiling

Members
  • Posts

    5
  • Joined

Reputation

10 Good
  1. Same issue here. RX 6900XT. No GPU temp since last update.
  2. Originally, I had the H150i ELITE LCD (non-XT version) installed in my system and it was working perfectly. After replacing my motherboard with something a little newer (Asus Crosshair VIII Hero to a Crosshair Dark Hero w/ newest BIOS as of June 2023), the LCD screen on the pump would only show a red triangle/exclamation point. In iCUE, just "Commander CORE" would appear. I could still control the fan speeds/RGB and the "Coolant Temp" sensor was also available. The pump itself appeared to be functioning and moving coolant, although I could no longer view the RPMs via iCUE. When the system would boot, the LCD display would show the typical Corsair splash screen and then the generic circling "Temp" screen for split second before returning to the red exclamation point/triangle. I was going to reformat the system and reinstall Windows anyways (due to replacing the motherboard), so I didn't give this issue much thought and didn't troubleshoot anything at the time. After completely reformatting and reinstalling Windows... Same issue. Red triangle/exclamation point. Besides installing the newest chipset and GPU drivers from AMD's website, no other software had been installed yet so absolutely nothing else would have interfered with iCUE (like Armory Crate). I double-checked the wiring and made sure everything was snug, reseated the LCD screen on the pump, switched off the PSU for a minute, plugged the USB ends into their own headers on the motherboard instead of using the Y-splitter, reinstalled iCUE v5.2.128 (includes deleting registry keys and the folders in %appdata%), force updated the firmware (Commander CORE v2.0.19), and also tried using a powered internal USB header splitter from NZXT. When installing iCUE, "LCD Screen" is on the list of detected devices and appears in Software Updates as "LCD Screen Pump Display" along with its appropriate icon. Same issue. Red triangle/exclamation point. Thinking I had somehow bumped/damaged the AIO when replacing the motherboard earlier and that might be the cause of the issue, I decided to buy the newer H150i ELITE LCD XT. I hadn't got very far in setting up my system previously, so I reformatted and reinstalled Windows again after installing the new AIO. Same issue. Red triangle/exclamation point. Although this was a brand new AIO, I did all the same troubleshooting steps as before anyways and also tried installing an older version of iCUE (v4.33.138) and even downgrading the BIOS on the motherboard, but still got the same result. So now I was thinking, maybe something was wrong with the new motherboard? I put the previous motherboard (Asus Crosshair VIII Hero) back in and reinstalled Windows... Exact. Same. Issue. Red triangle/exclamation point. HOW?! I'm at a loss and have spent soo much time and money on this. Any other ideas? Is there something I'm maybe missing? Otherwise, with everything I've done, I can only assume there's something wrong on Corsair's software/firmware end of things that desperately needs fixing ASAP (especially considering the cost for such devices)...
  3. I have the exact same error (0x000000000129bb58) and the exact issue too with 4.23, but on Windows 10.
  4. Ok, so I was able to resolve the issue on my motherboard (ASUS Crossfire Hero VII WiFi)... When I first got my motherboard, it had the version 0509 BIOS and the USB headers were working, but different Corsair devices would disconnect and reconnect randomly. Most notably my H150i AIO (connected on the Commander Pro) and the ST100 stand connected regular USB. Eventually, I got tired of the random flickering so I upgraded my BIOS to version 1103 (newest), but the H150i AIO AND my HX850i power supply (both connected to the Commander Pro USB headers) stopped appearing inside iCue. Every other Corsair device worked just fine. Digging through the new BIOS, I noticed a lot of USB handoff/control options no longer existed. The only related option that still remained was the XHCI handoff which was enabled. I downgraded to version 0702 and many USB options and controls reappeared. I left all the USB related options to their defaults (Auto) and everything started working again. In summation, if the newest BIOS version doesn't work for you, maybe try an older one?...
×
×
  • Create New...