Jump to content

Napascj

Members
  • Posts

    21
  • Joined

Everything posted by Napascj

  1. My 6 SP120's work fine with iCUE and have since its inception.
  2. Yes you're right the Commander Pro does what the Node Pro does and more (more being fan PWM ports, temperature probes and USB passthrough points). So yes, you can get a commander pro and add your new fans to it. Just note that the smaller RGB hub (where you plug the fans RGB cables in to) can only support the same type of fan at one time. So your new additional fans will have to be the same as you already have. If you buy different fans you would need to use a second hub.
  3. Thanks for your reply. That makes sense, but I can't think of what else may be the link causing the 1st fan to be a different colour. The only other piece of hardware connected to everything is the Commander Pro, but only the fan power is connected to that. The RGB Hub is using LED Port #1 of this but it was in my previous build too and it had no issue. I wonder if a re-install of iCUE may help.
  4. Hi guys, I have an issue with colour matching between fans. My setup is 4 SP120's RGB into an RGB hub, into a Commander Pro LED channel. I also have 2 ML120 PRO RGB fans connected to the H100i cooler so they do not use the RGB hub nor Commander Pro. After completing a new build 2 weeks ago I noticed my #1 SP120 fan is off-colour, for example the white is less blue-y, yellows look different etc. It's noticeable and annoying me. Today I swapped out the fan for a different one since I have a spare SP120 RGB. The replacement fan is doing the same, so now I'm guessing it's an issue with the RGB hub. Q: Can I skip port #1 on the RGB fan hub and use 2-5 instead? I have a feeling the issue might be with the first RGB port, unless you guys have any other theories. Thanks!
×
×
  • Create New...