FatzDomingo

Thanks

On selecting a Scene, I would like the option of a separate one to apply to my Pump/CPU - I'd like that to display Temperature whilst all other Corsair RGB Products rotate though their pleasing colour cycle. This gives me the Best of Both Worlds from your iCUE Software, pleasing to the eye whilst the RGB on my Corsair H1501i RGB PRO glows through Cool/Normal/Switching All the Fans On Full NOW Colours. Just a thought. Thanks.

One of the Gurus put me right on this I had an identical problem. Ensure that the 3 fans from the Radiator's power cables are connected to the Pump Header Cables marked 1, 2 and 3. Make sure the Header cable from the fan is in AIO Header on the motherboard. Now to sort the Bios throwing a Fit! Plonk a fan in the CPU-FAN Port ( make sure your port is matched to fan type (3 or 4 pin cable) in the bios (DC or PWM) This stops the BIOS throwing a wobbly when you boot up by warning you that it hasn't detected a Fan running for the CPU. Keep this Fans RGB in your Commander Pro/RGB Hub its ONLY the Power Cable that should be attached to the CPU Header. (ive got mine on an exhaust fan as its always running) Oh, and double check the connection for the USB cable from the fan. After that you should be good to go.

Thanks again! Now that I’ve gotten my head around this may I offer a fudge or a solution for ASUS Boards throwing a wobbly with nothing on the CPU Fan headers when properly fitting the AIO? Fit a good quality fan on the rear of the case as an exhaust fan and connect that to CPU-Fan the Motherboard no longer throws a wobbly on Post. Currently running a DC Fan, now will buy a pack of PWC and change motherboard fan headers to PWC from DC for anything I wish to run off of the headers. My Commander Pro will handle everything else apart from AIO Fans which are now properly connected to Pump Header. Thanks for setting me down the right path to work this out. My AMD Board is an Strix X570F for info.

Thanks for your assistance, apart from a plethora of Temp Sensors, things seem ok.....only the ubiquitous CPU Fan error on Post to deal with now.

Thank You! once I’m comfortable with this I’m changing everything over to a Commander Pro.

I'm working Blind on this. SCAN Computers provided NO Goody Box of all of the left over bits from my New Build (Not a manual, not a cable, no fastenings - they even stripped out the Corsair Cable Rig and Straps from my 5000D Airflow Case and cable tied the cable runs----insane! I'm currently trying to resolve) To add insult to injury they gave me the Cabling Rig Frame but none of the Velcro Straps. PWM Card not there either. If you could direct me to which cable you intend me to splice into I'd be grateful.

This is a picture of iCUE running on my new build supplied by a Box Builder Nothing is where I expect it to be and I'm sure my ROG X570-F (AMD) doesn't have 14 Temp Sensors. Also it looks like the AIO Fans are showing up under motherboard instead of H150i Any clues would be appreciated.