Jump to content
Corsair Community

shadotracker

Members
  • Posts

    59
  • Joined

Reputation

10 Good
  1. Some more interior pics!! http://imgur.com/XTjvKjOl.jpg http://imgur.com/BiRbcGll.jpg http://imgur.com/YMb2Ht0l.jpg http://imgur.com/rEztEmwl.jpg http://imgur.com/3blZyuVl.jpg http://imgur.com/JaEo6Ybl.jpg http://imgur.com/8czdocyl.jpg http://imgur.com/2LOae2Jl.jpg http://imgur.com/GCs1NrEl.jpg
  2. This build took a bit longer than I had planned due to some issues regarding my own personal bills and life, which can happen to anyone. I would like to thank Corsair for giving me the honor of doing this build and being sponsored by them! Without them, none of this would have been possible! I would also like to thank all those involved in this build: Joe from Senpai Studios, Jim from Clockwerk Industries, Miguel from EK, and my friend Matthew. One build down. Time to plan the next one!!
  3. Final Pictures!!! http://i.imgur.com/vIyW2WAl.jpg http://i.imgur.com/nNK6uvOl.jpg http://i.imgur.com/8yd919sl.jpg http://i.imgur.com/I7dztPyl.jpg http://i.imgur.com/ugAd1d5l.jpg http://i.imgur.com/PS2bZfPl.jpg http://i.imgur.com/SfuVrKrl.jpg http://i.imgur.com/ljI5txBl.jpg http://i.imgur.com/ldtVgzIl.jpg
  4. Time for the fun part! Bending the tubes!! http://i.imgur.com/qmI75qsl.jpg http://i.imgur.com/RQVOmFjl.jpg And now to fill the whole loop up!! http://i.imgur.com/Gng4MPHl.jpg http://i.imgur.com/sBODpinl.jpg Got it leaked test and with in a couple of hours, I was on my way to Dreamhack Austin. http://i.imgur.com/QOepPdHl.jpg http://i.imgur.com/PIXObLIl.jpg
  5. Once I finished the first terminations, I connected them to the correct ports on the mother board and GPU to make sure that they fit properly and let them relax into the position they will be in once everything is assembled. http://i.imgur.com/SgEUmIOl.jpg Additionally, I cut a piece of acrylic to mount the Pro Controller and the LED controllers for the fans and gave them a nice clean look. Thanks to Joe from Senpai Studios with the help of shortening the cables runs on the controllers. http://i.imgur.com/QgqPJsdl.jpg Completed the termination of the sleeved cables and routed them to the correct locations. http://i.imgur.com/nPEv5p2l.jpg http://i.imgur.com/K7N1cTFl.jpg
  6. Huge shoutout to Joe from Senpai Studios for taking the time to teach me how to sleeve cables! I would have not been able to do this without his guidance. I spent the day doing some sleeving for the build. I went with OD green and Desert Tan Camo for the colors to represent the armed forces that are apart of Rainbow Six http://i.imgur.com/4be6SpPl.jpg http://i.imgur.com/EyFiNQjl.jpg http://i.imgur.com/UeeIHCpl.jpg
  7. Hello everyone!! There is going to be a lot of updates in the next few days!! I plan on finishing this build up just in time for Dreamhack Austin. To start off, the PSU cover!! I worked in conjunction with my friend at Clockwerk Industries on the design and size of the PSU cover. Once I received the cover, I added some pass through ports to make it ready for the tubing layout. http://i.imgur.com/GHOpAhql.jpg http://i.imgur.com/7uMpybol.jpg http://i.imgur.com/SH0N0cpl.jpg Then I went to go get some vinyl made for the glass panels. Time for the logos!! http://i.imgur.com/QfCbyxql.jpg http://i.imgur.com/awrXDd4l.jpg http://i.imgur.com/uhp795jl.jpg
  8. Sorry for the lack of updates. I have been busy with life and family medical issues recently. I will post something here as soon as I can.
  9. The length of the custom shroud that I will be using is as follows: 15" x 6.75" x 3.75"
  10. A quick update. Finally settled on the color I wanted for the drone reservoir. It took me 2 weeks and multiple different colors of silver and grey, but I am pleased with what I have done. http://i.imgur.com/qUyVGJXl.jpg http://i.imgur.com/A47ogF4l.jpg http://i.imgur.com/BekcCabl.jpg Additionally, I have received an ASUS 1060 for this build. http://i.imgur.com/x8bdMqdl.jpg http://i.imgur.com/rukxlASl.jpg There will be another update later tonight if not tomorrow showing all the cables!!
  11. As I teased a bit earlier in the thread, I did some clay modeling with the reservoir!! I started with this picture as a reference. http://i.imgur.com/NYAsAzdl.jpg From here I went and added clay all around the reservoir itself. Made a nice thick layer to carve all the excess and details from. http://i.imgur.com/K0x36lXl.jpg From there I carved the excess while streaming on Twitch as a way to involve those that wanted to learn more about modding and building computers. http://i.imgur.com/g4Bfr6vl.jpg After a couple of hours of carving I was able to get the basic shape. http://i.imgur.com/sVTWDHwl.jpg From there I went to go spray paint it into a gunmetal with some black gloss. Once that was done I clear coated it and let it cure. Later this week I will go back with some fine paint brushes to add more detail on the drone. http://i.imgur.com/wkKMRKll.jpg Additionally, not pictured was that I took some 2 way mirror acrylic and cut them down to size for the front panel. I plan on doing something a bit different with the front panel.
  12. Time to assemble the major components together!! http://i.imgur.com/CLTtPvBl.jpg http://i.imgur.com/aNNeDTal.jpg I love how the paint job on the heat spreaders for the fan turned out! http://i.imgur.com/J5LxVCYl.jpg http://i.imgur.com/ZQ9MFg4l.jpg Time for some cable management on the backside of the case. Along with mounting the Corsair Link and RGB controllers for the fans. http://i.imgur.com/O9UgZZ3l.jpg Testing fitment of the reservoir with a mock up psu shroud. Additionally, I added cable combs to the front. http://i.imgur.com/Ndc1iAfl.jpg http://i.imgur.com/PRfLFfsl.jpg
  13. I finished up painting some additional pieces. Painted the mounts for the glass along with the heat spreaders for the RAM. http://i.imgur.com/EHlI0pul.jpg http://i.imgur.com/QvJe3aIl.jpg http://i.imgur.com/1LUPMjel.jpg http://i.imgur.com/qBcLGvcl.jpg Time for the reassembly!! http://i.imgur.com/ME9Jq43l.jpg Also I was able to get a very nice motherboard and processor for this build!! http://i.imgur.com/aigAx5kl.jpg With the TUF thermal armor, I decided to take it off and paint it to match the case along with doing some touch up on the case itself. http://i.imgur.com/MgQikxOl.jpg Next time...some clay sculpting?!?!
×
×
  • Create New...