Spideysm Posted December 29, 2013 Share Posted December 29, 2013 i been having problems with my m90 mouse ever since the power went out. the power went out shutting off my computer and when i turned my computer back on the mouse pointer refused to work. i decided to use another mouse to reinstall the firmware and the drivers and i managed to get it working but now the cursor seems to jump everywhere as it moves. if i turn the dpi to the lowest seeting i can use it but the higher the dpi goes the jumpier it gets any idead to whats causing the problem? ive already tried cleaning the lens with a qtip and no luck Link to comment Share on other sites More sharing options...
Toasted Posted December 30, 2013 Share Posted December 30, 2013 Does the issue occur when plugged into another computer? Link to comment Share on other sites More sharing options...
Spideysm Posted December 30, 2013 Author Share Posted December 30, 2013 yes tried it on 2 other computers and had the same results Link to comment Share on other sites More sharing options...
Toasted Posted December 31, 2013 Share Posted December 31, 2013 Can you try adjust the lift height and see if that helps? Link to comment Share on other sites More sharing options...
Spideysm Posted December 31, 2013 Author Share Posted December 31, 2013 tried that too Link to comment Share on other sites More sharing options...
Toasted Posted January 1, 2014 Share Posted January 1, 2014 Request an RMA to replace the mouse. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.