danielok1993 Posted December 24, 2013 Share Posted December 24, 2013 Hi, Just got my new Vengance 2000 and firstly I have installed the drivers of the vengance website 2.0.16, then replaced them with beta 2.0.19 and I still dont have any sound! I have tried to swap USB ports, Unistallled with YourUninstaller, restarts, uninstall from System Drivers and reinstalled and restered and still nothing please help! Before I was using Roccat Cave and not a single issue. Link to comment Share on other sites More sharing options...
Toasted Posted December 25, 2013 Share Posted December 25, 2013 When you turn the headset on, does the L.E.D. on the dongle stay solid? Is the headset set as the default audio device in Windows? If it doesn't stay solid, re-pair the headset to the dongle. http://www.corsair.com/us/support/faq/audio/ Link to comment Share on other sites More sharing options...
danielok1993 Posted December 25, 2013 Author Share Posted December 25, 2013 I think I know what I did wrong, I did not fully charge the headset before the first use -.- well here we go not reading manual. I think this should be stated on the box ? I guess most people do not read manuals... the problem is my amber light is solid not pulsing? What do I do now? On the other hand, it connects and the blue light goes solid so I assume there should be sound? and yes it is default device Link to comment Share on other sites More sharing options...
danielok1993 Posted December 26, 2013 Author Share Posted December 26, 2013 Yeah everything is fine now, I had to discharge fully and charge till solid green and seems to be working fine now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.