Beerdude Posted December 22, 2013 Share Posted December 22, 2013 Recently, my new system I built refused to boot. It won't safe boot so I tried a repair install. Both a DVD and a USB attempt just stops after clicking on repair. It will sit for no matter how long I wait. I then tried a recent image which copied over successfully but made no difference. Finally, I tried a fresh install and that did the same thing.....it just sits there and does nothing. I left it alone for 2 hours and nada. Then I went away for hours, came back, turned it on and it worked. Toolbox shows nothing wrong and the 2 week old image was there so it did copy that over. The SSD showed in the BIOS but I don't know if that means it's not the SSD that's having a problem or not. I'm totally confused by this. Thanks in advance! Link to comment Share on other sites More sharing options...
Synthohol Posted December 22, 2013 Share Posted December 22, 2013 you can try changing ports/cables at least to rule them out. good luck Link to comment Share on other sites More sharing options...
Beerdude Posted December 22, 2013 Author Share Posted December 22, 2013 Thanks, I've just done that and so far, no difference. I'm thinking it's the firmware as I read more about the problems with 7.20. I'll have to wait and see what Corsair comes out with. Link to comment Share on other sites More sharing options...
Synthohol Posted December 22, 2013 Share Posted December 22, 2013 hey can you fill out your specs in your profile? it's a bit vague just saying "SSD" thanks! Link to comment Share on other sites More sharing options...
Beerdude Posted December 23, 2013 Author Share Posted December 23, 2013 Sorry, I belong to so many forums, I never think what I have listed in each one. It's completed now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.