masarup11 Posted December 19, 2013 Share Posted December 19, 2013 Hello their im looking for a mid-tower case that would fit my H100i in Push/pull setup and i've been searching for these cases almost a week now. all i end up is full-tower cases i hope you helped me out.. Current Specs: Asrock Z77 Extreme 6 Corsair Vengeance 2x8g Cooling: H100i Push/pull PSU: Seasonic 850W bronze VGA: Asus GTX 770 Direct CU II SLI SSD: Samsung 840 Evo 240g CPU: intel core i5 3570k HDD: WDC 1Tb Having problems with push/pull setup since some cases are hardware dependant.. thank you and have a great day Link to comment Share on other sites More sharing options...
wytnyt Posted December 19, 2013 Share Posted December 19, 2013 all you really need to do is look at the Corsair cases that support a h100i and the rest of your components should be no problem but actually i think all the cases support this cooler but the specs will clarify. even their smallest cases are well thought out and packed with lots of room you cant go wrong just noticed your push/pull query,im not sure even the mids would qualify for that with your m/b Link to comment Share on other sites More sharing options...
masarup11 Posted December 19, 2013 Author Share Posted December 19, 2013 all you really need to do is look at the Corsair cases that support a h100i and the rest of your components should be no problem but actually i think all the cases support this cooler but the specs will clarify. even their smallest cases are well thought out and packed with lots of room you cant go wrong just noticed your push/pull query,im not sure even the mids would qualify for that with your m/b thanks for the quick reply sir.. so in short sir i'll be having some trouble looking for a case with my current setup or m/b? Link to comment Share on other sites More sharing options...
masarup11 Posted December 19, 2013 Author Share Posted December 19, 2013 http://i38.photobucket.com/albums/e129/masarup11/1461054_610192755710260_1882718058_n.jpg i've seen this Rig using Corsair Air 540 but i dont know if my m/b would fit using the same setup Regards for FTW Industries they make great mods here in our country Link to comment Share on other sites More sharing options...
wytnyt Posted December 19, 2013 Share Posted December 19, 2013 actually i have this case now with plans on doing some mods on. i feel fairly sure you can do a push/pull easily as long as your heatsink is no higher then an inch,perhaps a tad more.the fans are set towards the cover giving extra room also,this is a great case... shop around i found mine for $99 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.