Jump to content
Corsair Community

Memmory errors reported by BIOS


Recommended Posts

I have a D875PBZ motherboard and with my initial install the BIOS recognized my memory as 333mhz. There is a configuration tool for setting the speed in the BIOS and I was able to set the speed to 400mhz. Ever since I have been getting memory errors and when the system boots I get 50% usage by system and 50% by system idle process. When this happens I am unable to open any applications and in order to restart the system I have to hold down the power button. I believe this is an intermittent problem, it's almost as if the memory is storing data after shotdowns or some of the addresses are not being reset. When the problem happens it tends to stay until I unplug the system for a few minutes. My memory is TwinX1024-3200LLPT.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...