mr_ako Posted December 12, 2013 Share Posted December 12, 2013 Hi I ve just installed the H110 on a 750D. I ve installed itt in this order chassis top grill-fans-radiator Although I put the fans as in the picture the air is coming out of the case. I should reverse the fans to pull air into the case, right? Thanks Link to comment Share on other sites More sharing options...
wytnyt Posted December 12, 2013 Share Posted December 12, 2013 which way is also dependent on how you have your case fans setup,it all works together... Link to comment Share on other sites More sharing options...
Belial_69699 Posted December 12, 2013 Share Posted December 12, 2013 When my 540 gets here, I intend on using 2 of the Corsair 140mm White LED fans on the front for intake, then using the fans on the H110 for exhaust at the top. Will also use another Corsair 140mm White LED fan on the back for another exhaust. This is my plan anyway, if anyone has better suggestions I'm open to it! :) Link to comment Share on other sites More sharing options...
wytnyt Posted December 12, 2013 Share Posted December 12, 2013 When my 540 gets here, I intend on using 2 of the Corsair 140mm White LED fans on the front for intake, then using the fans on the H110 for exhaust at the top. Will also use another Corsair 140mm White LED fan on the back for another exhaust. This is my plan anyway, if anyone has better suggestions I'm open to it! :) many would tell you to keep your fans as is but push air in with the hydro... Link to comment Share on other sites More sharing options...
Belial_69699 Posted December 13, 2013 Share Posted December 13, 2013 many would tell you to keep your fans as is but push air in with the hydro... Technically my set up would be the same that comes with the case. Only difference between the fans I was going to add vs the stock fans was the ones I was adding are LED. Link to comment Share on other sites More sharing options...
wytnyt Posted December 13, 2013 Share Posted December 13, 2013 Technically my set up would be the same that comes with the case. Only difference between the fans I was going to add vs the stock fans was the ones I was adding are LED. yes but adding a hydro will change the need for proper fan placement Link to comment Share on other sites More sharing options...
Belial_69699 Posted December 14, 2013 Share Posted December 14, 2013 yes but adding a hydro will change the need for proper fan placement What in your opinion is the ideal fan placement in the 540? :o: Link to comment Share on other sites More sharing options...
Diechel Posted December 14, 2013 Share Posted December 14, 2013 When placed as intake you will get a temperature drop of a few degrees because your intake air is cooler. But the output heat of the rad is coming into you PC. As outtake then your temps with be a few degrees higher because of heat producing components in your PC. I have my setup as top outtake. but maybe change this because of overclocking cpu. Link to comment Share on other sites More sharing options...
wytnyt Posted December 14, 2013 Share Posted December 14, 2013 What in your opinion is the ideal fan placement in the 540? :o: i use a combination of air flow and keeping things dust free intake air from front with sp fans and filter rear fan and cooler exhausting out.,,but this question will give many different opinions... Link to comment Share on other sites More sharing options...
Belial_69699 Posted December 14, 2013 Share Posted December 14, 2013 i use a combination of air flow and keeping things dust free intake air from front with sp fans and filter rear fan and cooler exhausting out.,,but this question will give many different opinions... hmm. My original plan was to use 2 of the AF 140mm white LED fans in the front of the 540 to bring cool air in, use another of the same fan on the rear as an exhaust. My cooler is an H110 and I was going to use it at the top of the 540 with the 110's SP fans blowing air through the cooler rad then out the top of the 540. Make sense? Or is there a better setup? Link to comment Share on other sites More sharing options...
wytnyt Posted December 14, 2013 Share Posted December 14, 2013 hmm. My original plan was to use 2 of the AF 140mm white LED fans in the front of the 540 to bring cool air in, use another of the same fan on the rear as an exhaust. My cooler is an H110 and I was going to use it at the top of the 540 with the 110's SP fans blowing air through the cooler rad then out the top of the 540. Make sense? Or is there a better setup? your setup will do nicely ,i tend to go overboard with sp fans as i like the raw power if needed:D: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.