SimDuch Posted December 11, 2013 Share Posted December 11, 2013 Hi people, I just finished the instalation of my h100i, did the register tweak for win 8.1 and its all good... I have 4 fans connected to the pump head, 2 for the rad and 2 for the front fan of the 750D.... In the Corsair Link soft, how can I know which one is ?? 2 fans on each splitter supply with the H100i ! My English is bad sorry ! thanks S. Link to comment Share on other sites More sharing options...
wa3pnt Posted December 11, 2013 Share Posted December 11, 2013 I simply unplugged the fans, one at a time, and then labeled each fan in Corsair LINK (TopFront, TopRear, etc.) as I identified them by their spinning down. RodeoGeorge Link to comment Share on other sites More sharing options...
wytnyt Posted December 11, 2013 Share Posted December 11, 2013 i just put resistance on the fan blades to see which one is lowering in rpm. un plugging a running fan is NOT good especially on a cooling node. i had to toss one in the trash from doing this... Link to comment Share on other sites More sharing options...
Specter Posted December 11, 2013 Share Posted December 11, 2013 There are 4 fan connections on the CPU block. Going from left to right, the fan connections are 4 - 3 - 2 - 1 fans 4-3 is the cable on the left connection fans 2-1 is the cable on the right connection Hope this helps Link to comment Share on other sites More sharing options...
SimDuch Posted December 11, 2013 Author Share Posted December 11, 2013 There are 4 fan connections on the CPU block. Going from left to right, the fan connections are 4 - 3 - 2 - 1 fans 4-3 is the cable on the left connection fans 2-1 is the cable on the right connection Hope this helps yes it does Specter ! like all the post above too ! thanks a lot guys !:D: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.