reaverclan Posted December 6, 2013 Share Posted December 6, 2013 Hi I have a new h100i and i love it its works fine my load temps are around 33c which is crazy good imo, anyway the one problem i am having is that when i put my computer to sleep it is fine but when i wake it up the h100i is not detected by Link, and my LED on the water block is white compared to my set blue(probably because it is not detected.) I have to restart my PC for it to appear in Link again. My question is this because of where it is plugged in my system as it using my second internal USB 2.0 header. as i have circled in the pic below. Thanks for your time. rvc http://i.imgur.com/mhfxrTP.jpg Link to comment Share on other sites More sharing options...
wytnyt Posted December 6, 2013 Share Posted December 6, 2013 not sure with your m/b but go into bios and set the header to always on,if this doesnt work theres no need to reboot ,just restart the link. Link to comment Share on other sites More sharing options...
reaverclan Posted December 6, 2013 Author Share Posted December 6, 2013 restarting the link does nothing it just shows my pump and fans at 0 rpm. all my ports should always be on. im pretty sure that's set right. will test by using a external port on the back and get back with results i think its a irq issue honestly. EDIT this is what it shows if i restart link rvc http://i.imgur.com/MN7eO4J.jpg Link to comment Share on other sites More sharing options...
wytnyt Posted December 6, 2013 Share Posted December 6, 2013 sleep is a problem with the link since sleep disrupts the links connection the prior suggestion works on one of my pc's,the other one i have to open task mgr and close corsairlinkhardwaremgr,wait 15 seconds and then restart link.a hassle but better than booting. Link to comment Share on other sites More sharing options...
wa3pnt Posted December 6, 2013 Share Posted December 6, 2013 I occasionally have Corsair LINK stop working on my Windows 8 machine. I use this "Restart On Crash" (free) program Monitor Corsair LINK, and then when it stops run a script that closes the CorairLINK_Hardware_Manager process, and then restart Corsair LINK. http://w-shadow.com/blog/2009/03/04/restart-on-crash/comment-page-11/#comment-345316 RodeoGeorge Link to comment Share on other sites More sharing options...
reaverclan Posted December 6, 2013 Author Share Posted December 6, 2013 I occasionally have Corsair LINK stop working on my Windows 8 machine. I use this "Restart On Crash" (free) program Monitor Corsair LINK, and then when it stops run a script that closes the CorairLINK_Hardware_Manager process, and then restart Corsair LINK. http://w-shadow.com/blog/2009/03/04/restart-on-crash/comment-page-11/#comment-345316 RodeoGeorge cruddy solution but its working so ill use till i can get around to trying the other cable location, it is defiantly that process that loses focus of it though because if i restart it then i can use link again. good looking out. rvc Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.