ChrisSteadfast Posted December 5, 2013 Share Posted December 5, 2013 hey, i owned the case Graphite 600T. Additional I want to buy the H100i. Can I use the H100i with 4 PWM fans? Push / Pull Config. What about the building? Do I need additional parts for this config? If the h100i compatible with Windows 8.1? Link to comment Share on other sites More sharing options...
peanutz94 Posted December 5, 2013 Share Posted December 5, 2013 Yes you can use 4 PWM fans as long as they dont exceed 2 amps per header on the cooler. You'll also need to source extra screws that would be 6/32x1.25in long. Link to comment Share on other sites More sharing options...
JRE Posted December 5, 2013 Share Posted December 5, 2013 hey, i owned the case Graphite 600T. Additional I want to buy the H100i. Can I use the H100i with 4 PWM fans? Push / Pull Config. What about the building? Do I need additional parts for this config? If the h100i compatible with Windows 8.1? I have the 600T case and I cannot install push/pull because of clearance issues with components on the mobo. My guess is that will hold true with most, if not all mobos. The only way it might work is to have the top fans and rad on top of the case and the fans affixed undeneatch but then you wouldn't be able to use the mesh piece on the top and it would be hard to route the tubing/pump through to the inside of the case. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.