Enacho Posted November 28, 2013 Share Posted November 28, 2013 Hello guys, Today i got my new pc components: Case: Corsair Carbide 200R Motherboard : B85-HD3 Gigabyte Cpu: INTEL Core i7-4770 RAM Memory: Corsair 8GB DDR3 1600MHz Vengeance PSU: Corsair Corsair AX760W After i installed all the components, connected all the PSU cables, i tryed to power on the pc and it started, then i powered it off from the "POWER ON BUTTON" , to move it to another room. After i moved it, when i tryed to power it on, the pc didn't start. When i push the power on button , all the fans start to spin for about one second then everything dies. What can i do? Link to comment Share on other sites More sharing options...
peanutz94 Posted November 29, 2013 Share Posted November 29, 2013 That sounds like the power switch on the case is bad. Disconnect BOTH the power and reset cables from the case to the MB. Now plug the reset switch to the power switch header on your MB. So now the reset button will act as the power button. Try this and see if the system acts normally. If not we'll start with the PSU. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.