Jump to content
Corsair Community

Corsair Neutron GTX in RAID 0


Shayd

Recommended Posts

So recently I got 2 Neutron GTX 240GB each in Raid 0 mode, hooked everything up, set up Raid 0 Installed OS, some basic drivers, tested in benchmark...and ****.

 

What I though I'd be gettinghttp://oi39.tinypic.com/i6a42q.jpg

 

What I'm actually getting http://oi42.tinypic.com/se86pt.jpg

 

So 2 Drives as fast as one? Huh? Corsair? Explain?

Link to comment
Share on other sites

  • Administrators
Without knowing detailed specs on either system it's hard to say what the issue could be. One thing that I can see though is that you're running yours as your OS drive whereas the other one is completely empty and is not the primary drive.
Link to comment
Share on other sites

What OS are you using?

Motherboard?

Latest RST version?

You're sure both are connected to sata 6gb/s?

What firmware of the SSDs?

 

Just to show you, here is my crystaldiskmark result

 

http://i40.tinypic.com/oh7e61.jpg

Windows 8 Pro 64-Bit

P8Z77-v Premium

Both are connected to SATA 3 with Original Asus Sata3 Wire only Optical Drive is hooked up to Sata 2

I don't know of the firmware last time I tried updating the Drive it froze entire system for half an hour and I had to hit the reset risking a brick (Or whatever you call it) of the SSD

No SRT Installed Asus mothermboard has it's own drivers

 

http://oi42.tinypic.com/28hmlia.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...