Di3zelHerbert Posted November 15, 2013 Share Posted November 15, 2013 Well my H100i was purchased in March and now I'd say its been nearly a month since I noticed that my white LED setting is now bright pink. Now I thought like most people here that had the problem, an LED might be blown out. However, this is what I've done so far in the software: -red 100 green 0 blue 0 - red -red 0 green 100 blue 0 - green -red 0 green 0 blue 100 - blue -red 0 green 100 blue 100 - same as blue 100 (not cyan) -red 100 green 0 blue 100 - pink -red 100 green 100 blue 0 - pink (flickers yellow twice, but then stays pink) Everything at zero turns the led off which is good, but for some reason i have to do this every time i turn my system on which is annoying. So I'm not sure what's going on as it seems mixing green is an issue, but the LED's are working just fine. Note that I have also updated my firmware to 1.0.7, as well as the corsair software i reinstalled using the one on their website. Is there a fix for this kind of issue or is this a straight RMA case? Thanks Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.