Jump to content
Corsair LogoCorsair Logo
Corsair Community
CORSAIR COMMUNITY Survey, we want to hear your feedback!

Questions about Corsair Graphite 600T

solidsnake1607

By solidsnake1607
in Cases

Recommended Posts

solidsnake1607

solidsnake1607

Posted
Posted

Hello everyone. I'm about to order through Amazon a Silver 600T

 

First question:

1- Does the top grill cover also have a dust filter on it or i must buy separately Dust Filters to place fans on top as intake?

 

2-Does the newer and latest production of this product includes an USB 3.0 Motherboard adapter/cable for the front USB 3.0 port or this is still an USB 3.0 extension that connect in the back io on the mobo?

 

3-I was thinking about replacing the included fans with Corsair AF120 i was wondering if in the front i can fit 2 Corsair AF120mm as intake without interfering with the front dust filter?

 

4-I was planning to put 2 Corsair SP120 in the H100i in the top both as INTAKE so it takes fresh air from above through the radiator and then pulled out by the internal 120mm exhaust fan in the rear, is this a recommended configuration or should i put the two SP120 pulling out hot air from the radiator to the top (Exhaust)

 

5-I bought through Corsair.com an entire kit of white sleeved cables for the AX1200i, i was wondering if i'm gonna be able to pass the cables through the first rubber grommet or i'll have to pass them through the hole that is a bit further from the rubber grommets (almost beside the hard drive cage)? I'm asking this because i want to hide them as much as possible .

 

6- Hmmm there is no sixth question LOL

 

Thanks for reading and helping me out.

Link to comment
Share on other sites
musicequips

musicequips

Posted
Posted

3. Yes, but would recommend the SpectrePro 200mm as it has MUCH better airflow and quieter...just turn your HDD cages 180degrees and it will need no other modification.

 

4. Configure so that fresh outside air is taken in. MUCH better airflow and less noise is available by the orange PWM fans!

 

5. That is the one I use.

 

6. Use a fan with more power for the rear exhaust fan. Velcro a 120mm fan on the outside back of the case where your video card(s) exhausts to take hot air out of the case. Wrap window insulation tape around a 120mm fan and make a bulkhead with it in the optical drive cage to blow additional fresh outside air across the mobo and video card(s). Install your H100i in a vertical position just to the left of your HDD cage(s)...works really well! Search videos.

Link to comment
Share on other sites
solidsnake1607

solidsnake1607

Posted
  • Author
Posted
3. Yes, but would recommend the SpectrePro 200mm as it has MUCH better airflow and quieter...just turn your HDD cages 180degrees and it will need no other modification.

 

4. Configure so that fresh outside air is taken in. MUCH better airflow and less noise is available by the orange PWM fans!

 

5. That is the one I use.

 

6. Use a fan with more power for the rear exhaust fan. Velcro a 120mm fan on the outside back of the case where your video card(s) exhausts to take hot air out of the case. Wrap window insulation tape around a 120mm fan and make a bulkhead with it in the optical drive cage to blow additional fresh outside air across the mobo and video card(s). Install your H100i in a vertical position just to the left of your HDD cage(s)...works really well! Search videos.

 

1. No, it does not have a dust filter

Pic: http://www.corsair.com/us/media/catalog/product/cache/26/image/9df78eab33525d08d6e5fb8d27136e95/c/c/cc600t-topmesh.png

 

2. No it does not contain a USB 3.0 to internal plug adapter, If it hasn't been recently updated, The USB 3.0 is still a pass through cable. (Connect to the rear motherboard ports).

 

 

 

Thanks you guys for the Replies!

 

Do you think i'll need to mod something to fit the Spectre Pro 200mm in the front?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...