l0rkh Posted October 29, 2013 Share Posted October 29, 2013 Hi, since the timings on XMP profile are all wrong and it doesn't work properly I was wondering which are the clocks that it supposed to work when you enable the XMP profile. Well i know that the timings of CL-9, tRCD-11, tRP-10,tRAS-30 have to be that way to run at 2133MHz but how about tRFC? I am currectly timings it at 128 but can I go any further? And if I can what is the clock it was supposed to run when you activate the XMP profile? Thanks in advance. Link to comment Share on other sites More sharing options...
Synthohol Posted October 29, 2013 Share Posted October 29, 2013 please post a screenshot of CPU-Z mem and spd tabs. thx. Link to comment Share on other sites More sharing options...
peanutz94 Posted October 29, 2013 Share Posted October 29, 2013 Well i know that the timings of CL-9, tRCD-11, tRP-10,tRAS-30 have to be that way to run at 2133MHz but how about tRFC? I am currectly timings it at 128 but can I go any further? Just set the first four like you have and leave everything else on auto for the MB to adjust. What makes you think the XMP profile is wrong? Link to comment Share on other sites More sharing options...
l0rkh Posted October 29, 2013 Author Share Posted October 29, 2013 First of all thanks for the quick reply. @Synthohol here are the screenshots you asked for. @peanutz94 cause everytime I enable XMP the timmings are 7-11-10-31 so the system wont start up. I did a quick research before I enable it and I read that every person who bought those RAMS have the same issue with XMP profile. Thanks in advance. Link to comment Share on other sites More sharing options...
Synthohol Posted October 29, 2013 Share Posted October 29, 2013 looks like the SPD was programmed wrong. you can either enter in the 9-11-10-30 2t timings manually or RMA the pair. likely the ram is fine, just the SPD was keyed in incorrectly. it's up to you. Link to comment Share on other sites More sharing options...
l0rkh Posted October 29, 2013 Author Share Posted October 29, 2013 looks like the SPD was programmed wrong. you can either enter in the 9-11-10-30 2t timings manually or RMA the pair. likely the ram is fine, just the SPD was keyed in incorrectly. it's up to you. Well the RAM is fine as it passed Memtest+. I did enter timings manually but my question is after I enter timings manually what was the tRFC supposed to be? Or leave it auto would be better? And one more question the SPD as it shows on CPU-Z SPD is wrong after I entered manually the timings or it is ok now? Thanks in advance. Link to comment Share on other sites More sharing options...
Synthohol Posted October 29, 2013 Share Posted October 29, 2013 the memtab will show what timings are used. the SPD tab will still display incorrect info. i've seen this before and honestly if the ram is stable with manually set timings just leave it alone and enjoy. also the tFRC leave on auto unless you have an issue. check back with us in a week and let us know if everything is still good. Link to comment Share on other sites More sharing options...
l0rkh Posted October 29, 2013 Author Share Posted October 29, 2013 Okay thanks a lot for the help. :D: Link to comment Share on other sites More sharing options...
l0rkh Posted November 8, 2013 Author Share Posted November 8, 2013 After 1 week of testing with Memtest+ and benchamarks I had only one random restart and that's when I had the tRFC 104. After I left it on AUTO everything is running normal until now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.