pabloottawa Posted October 28, 2013 Share Posted October 28, 2013 OK so here's a strange one. I can't use all 4 bays at once. I can only use 3 of them. Right now I have the top three bays in use. Top two are 2 velociraptor drives in RAID 0. Under them is my Mushkin SSD OS drive but the bottom drive (agility 2 SSD 64Gb) is not detected. Here's the spin. If I take out all the drives and put the agility 2 SSD drive on the bottom tray, my bios detects it and so will windows. But the instant I use all the drives the bottom one disappears in the bios and in windows. Has anyone else had this issue? Self built system Processor: i7 3930K 3.2 stock @ ~4.5 CPU Cooler: Corsair H100i Motherboard: Asus P9x79 DELUXE Memory: 6 x 4 Gb Kingston HyperX RAM triple channel 24GB total Video Cards: Gigabyte GTX 760 4GB x 2 in SLI Monitor: BENQ XL2420T 120Hz Gaming monitor PSU: Cooler Master Silent Power 1000W Hard Disk: 1 Mushkin 240gb (primary OS) plus a few other storage drives Optical Drive: LG Blu Ray Burner Case: Corsair Obsidian 800D Sound Card: Onboard 5.1 Software: Win 7 x64 Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Shaman Posted November 4, 2013 Corsair Employees Share Posted November 4, 2013 This may have something to do with the SATA power delivery. try to install both SSD but only use 1 of the Velociraptor HDD and see if all 3 drives are detected. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.