Zabimaka Posted October 26, 2013 Share Posted October 26, 2013 Hello!Sorry for bad language:) So recently i bought new Corsair HX 850, i installed and have problem when it without any load or with it spins on 100%, i took it back to reseller and we tested in together on their system (it was AMD proc. and 650 GTX) Furmark+Linx (they even put a bag on PSU to make it more hotter)but PSU was very quiet and spins sometimes and make no noise. I came home but it still the same, i tryed: Turn on/off C1E support, EIST, Intel C state. I already changed motherboard, reinstall Win8 but still right now i write this post PSU keep's spin on 100% about 3-5 min then calm down (but i don't do anything to load him). Can problem be in VGA card? I noticed when i go on BIOS, its rather quite. Thank you. Link to comment Share on other sites More sharing options...
peanutz94 Posted October 26, 2013 Share Posted October 26, 2013 I already changed motherboard, reinstall Win8 but still right now i write this post PSU keep's spin on 100% about 3-5 min then calm down (but i don't do anything to load him). Can problem be in VGA card? I noticed when i go on BIOS, its rather quite. No the problem would be in the PSU. Specifically the fan controller. If you would like to have it replaced just use the link on the left to request a replacement. Link to comment Share on other sites More sharing options...
Zabimaka Posted October 27, 2013 Author Share Posted October 27, 2013 Thank you for fast answer, i already submitted ticket and waiting answer from support. P.S I tested power consumption with multimeter on max load (LinX + Furmark)and its about 350-400w, so problem still in PSU, also i made ground on power outlet, no changes:( Link to comment Share on other sites More sharing options...
Zabimaka Posted October 29, 2013 Author Share Posted October 29, 2013 Sorry, 1 more question, HX 850 must spin unstoppable under 350-400w load all the time or it must start-stop sometimes? Right now i put PSU near with PC and its quiet, i think something gaining vibration or maybe i just do smth, thats why i ask about spining. Thank you in advance. Link to comment Share on other sites More sharing options...
peanutz94 Posted October 29, 2013 Share Posted October 29, 2013 Correct, the fan should not spin until it reaches about 40% load. If the fan is spinning all the tie then you should have it replaced. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.