Jump to content
Corsair Community

H100i detection fix?


4D7

Recommended Posts

Ram Guy,

 

Has your lab created a fix for the group of us that have pseudo working coolers? aka Brain Dead.

 

Fans Work

Pump Works

LED Not working

Corsair Link cannot detect the unit

No way to control the unit in LINK, it is not listed.

 

Cannot flash firmware because LINK does not detect the unit.

Have tried every USB header, even external to a laptop with a new software installation, it could not detect.

 

This was a "working" unit prior to a simple firmware update that Corsair released.

 

There must be some way of doing a low-level reset.

 

Thanks in advance.

Link to comment
Share on other sites

Fans Work

Pump Works

LED Not working

Corsair Link cannot detect the unit

No way to control the unit in LINK, it is not listed.

 

Cannot flash firmware because LINK does not detect the unit.

Have tried every USB header, even external to a laptop with a new software installation, it could not detect.

 

You need to have the uSB dongle RMA'd. That should fix your connection issues.

Link to comment
Share on other sites

By dongle, do you mean the USB cable? I have tried a variety of other micro USB cables with no resolve besides, a firmware update would not damage a dongle. There has to be a way we can reset the controller in the pump.
Link to comment
Share on other sites

  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...