CTV Posted October 6, 2013 Share Posted October 6, 2013 Hi I have a Graphite 600T, along with an AX760i and H100i. Problem is, I don't have enough USB on my motherboard to connect everything. I have resorted to not connecting 2 of the 4 front USB ports on my 600T. Is there a way to daisy-chain my AX760i and H100i so that the both run off a single USB header? If possible, does it matter which is connected to the motherboard and which is linked into the other? Are there any known issues if configured this way? Many thanks Link to comment Share on other sites More sharing options...
wytnyt Posted October 6, 2013 Share Posted October 6, 2013 try this,several have had good results using it. http://www.amazon.com/NZXT-IU01-Internal-Expansion-Black/dp/B0031ESKJA/ref=sr_1_1?ie=UTF8&qid=1381092874&sr=8-1&keywords=nzxt+usb+hub Link to comment Share on other sites More sharing options...
thenosbod Posted October 6, 2013 Share Posted October 6, 2013 the comm cable from the ax760i can be connected to the socket next to the usb socket on the h100i pump unit Link to comment Share on other sites More sharing options...
CTV Posted October 7, 2013 Author Share Posted October 7, 2013 the comm cable from the ax760i can be connected to the socket next to the usb socket on the h100i pump unit Hi, so in essence the AX760i comm goes into the H100i which goes into the motherboard? Link to comment Share on other sites More sharing options...
thenosbod Posted October 7, 2013 Share Posted October 7, 2013 yes that is correct. I have got my 860i running with my h100i in this way. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.