skates Posted October 6, 2013 Share Posted October 6, 2013 Hi, I'm going to be mounting my H110 on the front panel of my Air 540, which I've not done before and I'm going to set up a 4 fan configuration. I'm thinking the two fans facing the front of the case should be intake and the two fans facing the inside of the case should be exhaust? It's a bummer it has to exhaust inside the case, which is why I'm thinking the two top case fans should be exhaust as well and the bottom fans (extras) should be intake. Any comments on this set up would be appreciated. Link to comment Share on other sites More sharing options...
peanutz94 Posted October 6, 2013 Share Posted October 6, 2013 Skates, really all you can do is test it both ways and see what yields the best temps. Things will change from case to case, ambient temps, ect, so on and so on. Link to comment Share on other sites More sharing options...
wytnyt Posted October 6, 2013 Share Posted October 6, 2013 i would always exhaust the cooler,bringing air in may yield a couple degrees cooler but youll always be sucking in dust constantly,,let your other fans do the filtering... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.