GrahamB Posted September 27, 2013 Share Posted September 27, 2013 Does anyone know what is the latest AX760i firmware for use with Link is? and where it can be downloaded from. Link reports mine as having no version, it is blank. I had to update everything else in Link and H100i from the shipped versions but haven't been able to find anything for the AX760i. Link to comment Share on other sites More sharing options...
froglegs Posted September 27, 2013 Share Posted September 27, 2013 I'm not sure if corsair even has firmware updates for their PSUs. My corsair link has never shown anything available. Link to comment Share on other sites More sharing options...
peanutz94 Posted September 27, 2013 Share Posted September 27, 2013 No, none of the PSU's require or have any FW updates. It shows blank because you do not have a Hseries cooler or any of the LINK products...besides the PSU. Link to comment Share on other sites More sharing options...
GrahamB Posted September 27, 2013 Author Share Posted September 27, 2013 No, none of the PSU's require or have any FW updates. It shows blank because you do not have a Hseries cooler or any of the LINK products...besides the PSU. H100i, Link commander, cooling and lighting node and AX760i. Link commander and H100i into USB headers, AX760i connected to link commander. Link version 2.4.5065 shows in options devices Version: Channel: 1 Connected fan(s): 1 Detected Temp Sensors: 1 Link to comment Share on other sites More sharing options...
GrahamB Posted September 27, 2013 Author Share Posted September 27, 2013 No, none of the PSU's require or have any FW updates. It shows blank because you do not have a Hseries cooler or any of the LINK products...besides the PSU. Thank you for the no update info, but why would not having other components (which I do) possibly make a difference? Link to comment Share on other sites More sharing options...
Ahtlon Posted September 28, 2013 Share Posted September 28, 2013 Try to disconnect the link commander and connect the h100i and ax760i on the main-board, if they show up in link software, you could first connect only the commander and hot plug the h100i to your commander, look if it show up in the software and then connect your ax760i to your commander. If this doesn't helps contact tech support for this problem. Link to comment Share on other sites More sharing options...
peanutz94 Posted September 28, 2013 Share Posted September 28, 2013 Thank you for the no update info, but why would not having other components (which I do) possibly make a difference? Sorry, that was my fault for missing the cooler and I didn't know you had the commander unit to. But the original question was Does anyone know what is the latest AX760i firmware for use with Link is? and where it can be downloaded from. Link reports mine as having no version, it is blank. There is no FW updates for the PSU. I just didn't want you wasting time looking for something that wasn't there to begin with. @Athlon....Does your Ax760I show a FW number in the link software? It should be blank as well. Link to comment Share on other sites More sharing options...
Ahtlon Posted September 29, 2013 Share Posted September 29, 2013 nope, no fw number in the software only as Corsair AX760I and nothing more. Link to comment Share on other sites More sharing options...
GrahamB Posted October 2, 2013 Author Share Posted October 2, 2013 Try to disconnect the link commander and connect the h100i and ax760i on the main-board, if they show up in link software, you could first connect only the commander and hot plug the h100i to your commander, look if it show up in the software and then connect your ax760i to your commander. If this doesn't helps contact tech support for this problem. No I can see the PSU fine in Link, it's just the version number is blank. Shows AX760i Device information Version: Channel:1 Connected fan(s): 1 Detected Temp sensors: 1 Link to comment Share on other sites More sharing options...
peanutz94 Posted October 2, 2013 Share Posted October 2, 2013 No I can see the PSU fine in Link, it's just the version number is blank. Shows AX760i Device information Version: Channel:1 Connected fan(s): 1 Detected Temp sensors: 1 This would be the only and correct information you should see . It's all good! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.