vlps Posted September 20, 2013 Share Posted September 20, 2013 Hey guys I am almost done building my first pc, I have 2 cables that I am not entirely sure what to do with. The Sata power and sata data cables that come attached to the corsair 650d case. Are they used to power the hdd/sdd port on the top of the case? if so where do the cables need to be plugged in. I figure the sata data should go into the motherboard, but what about the sata power cable? Link to comment Share on other sites More sharing options...
peanutz94 Posted September 20, 2013 Share Posted September 20, 2013 Yes,those are for the hotswap bay up top. And you are correct, the sata cable goes to a port on the board and the sata power can go to any connection on your PSU. Link to comment Share on other sites More sharing options...
vlps Posted September 21, 2013 Author Share Posted September 21, 2013 Yes,those are for the hotswap bay up top. And you are correct, the sata cable goes to a port on the board and the sata power can go to any connection on your PSU. hey thank you for the response. i dont think my psu has a plug that would fit the shape of the sata power. am i gunna need to plug it into some type of adapter and then plug that into psu? sorry if i sound like an idiot explaining this. Link to comment Share on other sites More sharing options...
vlps Posted September 21, 2013 Author Share Posted September 21, 2013 nvm figured it out ty! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.