Trying to understand link

[will_s]

Have the latest version...only download it 2 days ago but basically I cant understand it. Have it open at the moment and the only readings I am getting are :

H100i fan : 880

Hi100 fan : 842

Hi100 pump : 2210

H1100 Temp 1 : 22.3 ( room temp about 17 C )

Hi100 Led : red

Core i7-4770K % : the value goes from 0.00 to 1.56 ( constantly changing )

Now what does the Core i7 4770K % mean ? a percentage of what ?

Would I be right in assuming that the H100I temp would be roughly what the CPU is ? I had the Asus AI III suite on but removed it and used the cleaner to remove traces as I have been told that link and that program do not like each other

 

Before I start O/C I would like some accurate data like the CPU temp . I assumed that Link would show this .

 

 

 

 

btw: also shows my GPU and 3 hard drives but not my 3 case fans

[snfo]

% is the CPU usage

The H100i temp is the liquid temp, not the CPU temp. In idle the CPU temp is around 5º or 6º Celsius higher.

 

Link does not read Core i7 4770 temps or any of the new haswell series (Software bug) yet.

 

Your case fans must be connected to a Link cooling node or to your H100i

It does not read anything from motherboards.

[will_s]

% is the CPU usage

The H100i temp is the liquid temp, not the CPU temp. In idle the CPU temp is around 5º or 6º Celsius higher.

 

Link does not read Core i7 4770 temps or any of the new haswell series (Software bug) yet.

 

Your case fans must be connected to a Link coling node or to your H100i

 

ok thankyou

 

so except for the pretty red logo on my cooling block link is pretty useless until the bug is fixed

 

how do I set the speed for the pump and fans , pretty much would like them around 90% or if I remove link the fans /pump will operate at default value whatever that is ?

[snfo]

Pump is fixed because it draws power from a sata connector and it's not PWM

By removing link I think the fans return to their defaults but I'm not sure.