Jzn2 Posted September 14, 2013 Share Posted September 14, 2013 Hi guys, this month i built a computer and currently I am running a h100i. The 2 stock fans that comes with h100i (120mm) are directly connected to h100i pump. I have af140 for the rear fan. I also have 2x Fractal Design 140mm in front as well. So for those who are curious with my air flow I am using h100i as a exhaust while 3x 140mm are pulling airs in. Here are some of my problems. Time to time if I exit CorsairLink2 i cant control the fan speed of my h100i including the 2x120mm fans. If I re-install, it works for first couple of times and doesn't work again. -How do i fix the problem on my screenshot? -I have just purchased 2x Noctua nf-f12 pwm to replaced the stock h100i fans, does anyone know if these fans can be controlled using CorsairLink2? Here is the SS of my CorsairLink2 http://i3.photobucket.com/albums/y94/xtreamskill/corsairlink2ss1.png As you can see, the h100i fan1 and fan2 and h100i pump are showing "0"s but its actually in fact running at previous settings which was set to (quiet mode)... Link to comment Share on other sites More sharing options...
madmecca1975 Posted September 14, 2013 Share Posted September 14, 2013 Have you installed net framework 4.5 what version of the link software are you using and what is the firmware version Link to comment Share on other sites More sharing options...
Jzn2 Posted September 15, 2013 Author Share Posted September 15, 2013 Have you installed net framework 4.5 what version of the link software are you using and what is the firmware version Its a new computer and I do not have it installed. But does it matter? It was working and it stopped working. If I re-install CorsairLink2, it will work but probably will stop working after a day at most. Link to comment Share on other sites More sharing options...
wytnyt Posted September 15, 2013 Share Posted September 15, 2013 if at first it worked for you then you have .net framework installed but it needs to be current in order to be reliable. Link to comment Share on other sites More sharing options...
madmecca1975 Posted September 15, 2013 Share Posted September 15, 2013 As far as I know you need net framework 4.5 installed for it to work just down load it from Microsoft web page Link to comment Share on other sites More sharing options...
madmecca1975 Posted September 15, 2013 Share Posted September 15, 2013 As for the noctua fans corsair can not promise they will work properly they will always tell you to use the sp120l that came with the h100i Link to comment Share on other sites More sharing options...
Jzn2 Posted September 15, 2013 Author Share Posted September 15, 2013 So anyone know what the problem is? Link to comment Share on other sites More sharing options...
wytnyt Posted September 15, 2013 Share Posted September 15, 2013 So anyone know what the problem is? were trying to help with our prior posts. Link to comment Share on other sites More sharing options...
Jzn2 Posted September 15, 2013 Author Share Posted September 15, 2013 Because if I re-install it, it will work. But if i close the program couple of times it stops working. I feel like it has to do with my log file or some sort directory issues... Link to comment Share on other sites More sharing options...
wytnyt Posted September 15, 2013 Share Posted September 15, 2013 id be inclined to think its a usb issue,what usb devices are hooked up? Link to comment Share on other sites More sharing options...
Jzn2 Posted September 16, 2013 Author Share Posted September 16, 2013 I believe I have found the solution and what caused the problem. If I re-install the CorsairLink2, all the problems were fixed. The problem was that anytime if I start CorsairLink2 and it doesn't appear right away, I open task manager and end task the CorsairLink2. This was what was causing the problem. So instead of re-installing I went into Options>General>Settings> clicked "Restart" and boom! Everything works like new. Thanks everyone for support! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.