TacticalTimbo Posted September 11, 2013 Share Posted September 11, 2013 In the midst of planning how to setup an H110, and just wanted to gain some clarity on the cabling layout, before I go ahead and install it. Basically the manual is a bit scant when it come to cabling directions, and most of my understanding comes from other threads I've read on this forum. For the fans it's best to use the fan headers of the motherboard, I will use CPU, and CPUopt on my Rampage IV Extreme... For the pump, it's my understanding that it needs a constant 12v supply, and that it's best to connect it direct to the PSU via molex to ensure it gets this? However I will need to buy a 3pin to Molex adapter, and would just like clarity on which of the following will be okay; http://www.ebay.co.uk/itm/PSU-Molex-4-pin-to-3-pin-12V-Fan-Socket-Cable-Convertor-/180409187115?pt=UK_Computing_CablesConnectors_RL&hash=item2a0139bb2b (bit messy, and don't like the non-black colouring) http://www.ebay.co.uk/itm/Molex-IDE-4-to-3-pin-CPU-Chasis-Fan-Power-Adapter-Cable-/190889551462?pt=UK_Computing_CablesConnectors_RL&hash=item2c71e76666 (cleaner design, but still not all black) http://www.ebay.co.uk/itm/4-pin-molex-to-3-pin-PC-fan-adapter-cable-PC-Modding-/190889551484?pt=UK_Computing_CablesConnectors_RL&hash=item2c71e7667c (all black, but only 2 wires; will this be sufficient?) Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.