Gil80 Posted August 28, 2013 Share Posted August 28, 2013 Hi, I never changed firmware or installed CorsairLink. My firmware is 1.05. When I got the unit it had white colour. With time it changed to yellow and now stuck on red. I installed CorsairLink to change led colour but it wont change. Any advice? Sholud I update Link USB firmware to 2.06? Link to comment Share on other sites More sharing options...
Toasted Posted August 29, 2013 Share Posted August 29, 2013 Have you tried a different version of the software? Does it help? Link to comment Share on other sites More sharing options...
Gil80 Posted August 29, 2013 Author Share Posted August 29, 2013 Yes I've tried at least 3 different versions Link to comment Share on other sites More sharing options...
Toasted Posted August 30, 2013 Share Posted August 30, 2013 You can update the FW to 1.07 and see if that does anything though i don't think it will. http://forum.corsair.com/v3/showthread.php?t=118867 Link to comment Share on other sites More sharing options...
GhostToast Posted August 30, 2013 Share Posted August 30, 2013 I noticed this this morning as well. I decided to install the Corsair LINK 2 (had no software handling this before), and after fiddling around it seems the red LED is working, and no other. A little disappointed in this. Curious if anyone else has an idea. A bit nervous to try the firmware upgrade Link to comment Share on other sites More sharing options...
Gil80 Posted August 30, 2013 Author Share Posted August 30, 2013 You can update the FW to 1.07 and see if that does anything though i don't think it will. http://forum.corsair.com/v3/showthread.php?t=118867 I don't believe it will help as this update doesn't address this issue at all. Searching google gave many results but no real solution. Still looking for an answer Link to comment Share on other sites More sharing options...
shadowwh Posted August 30, 2013 Share Posted August 30, 2013 I have the same issue with my H100i is stucked on the RED LED... i've already tried to install, uninstall and even update the firmware and the LED is stucked... i did a clean Windows 8 x64 install without installing the Corsair Link Software... but then i got the idea to change my LED COLOR to green so i installed the software and then NO CHANGES!... i can move the LED slide and red works but the other ones nope! any FIX??? BTW: I'm from México and i need a answer or i will go to warranty then >.< Link to comment Share on other sites More sharing options...
GhostToast Posted August 31, 2013 Share Posted August 31, 2013 I have requested an RMA. I will update with my progress. Yes it seems petty because it is "just" a pair of LEDs, but the build of this device is what I am relying on to keep my expensive CPU from melting. It is interesting, however, that it is the red channel for all of us. Tried googling "hydro 80i blue led stuck" and found this: http://forum.corsair.com/forums/showthread.php?t=119293 Seems this is kinda what happens when the LEDs go out... Hadn't considered returning it through Newegg (my supplier). Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 3, 2013 Corsair Employees Share Posted September 3, 2013 If you cannot change the color manually in the software then I am sorry but it would need to be replaced. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.