wa3pnt Posted August 20, 2013 Share Posted August 20, 2013 Starting a build in 500R Case with AX860i and H100i. Both state to a USB2.0 Header on the motherboard, but I only have one header vacant on my ASUS Sabertooth 990FX. Can the cable from the Comm port on the AX860i be connected to the vacant port on the H100i Fan? Or do I need to use the USB Dongle between the AX860i and any USB connection? (Hoping that the H100i Fan Assembly will perform any Dongle requirements) RodeoGeorge Link to comment Share on other sites More sharing options...
wytnyt Posted August 20, 2013 Share Posted August 20, 2013 ive read on here that you can connect a i series psu to the cooler to free up a usb port... Link to comment Share on other sites More sharing options...
WesternDreaming Posted August 21, 2013 Share Posted August 21, 2013 i connected my axi1200 out of the com port in the back and then into the side of my h100i with the included cable into the pumphead on the side next to the mobo out header all shows up in corsair link no problems Link to comment Share on other sites More sharing options...
wa3pnt Posted August 21, 2013 Author Share Posted August 21, 2013 Thanks you for the replies. I thought that I have read that the PSU could be connected through the Cooler Head, but I've read so much in the past few days that it gets gray at times. Maybe the 71 year old brain is a factor. LOL RodeoGeorge Link to comment Share on other sites More sharing options...
wytnyt Posted August 21, 2013 Share Posted August 21, 2013 Maybe the 71 year old brain is a factor. LOL RodeoGeorge it isnt 'a' factor,,,it is 'the' factor im knocking at the age door and crs is in high gear:D: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.