INeedToLiveLong Posted August 20, 2013 Share Posted August 20, 2013 Will Corsair Force LS fit HP 6735s? Link to comment Share on other sites More sharing options...
Toasted Posted August 21, 2013 Share Posted August 21, 2013 You will need to check with HP and see if it will fit fine. The SSD form factor can be found on the SSD's product page. Link to comment Share on other sites More sharing options...
Administrators Technobeard Posted August 21, 2013 Administrators Share Posted August 21, 2013 The drive is 7 mm thick. Link to comment Share on other sites More sharing options...
INeedToLiveLong Posted August 26, 2013 Author Share Posted August 26, 2013 The drive is 7 mm thick. I know it is 7mm thick and bay is 9.5 mm thick, I know cage in bay has both holes from bottom and side screws, but i don't know if 7mm and 9mm drives have screws in exactly the same place relatively to bottom part of drive and sata interface. I dont know if location of sata and power connector is the same. What I found on internet are 2 contradicting things. Link to comment Share on other sites More sharing options...
INeedToLiveLong Posted August 28, 2013 Author Share Posted August 28, 2013 I know it is 7mm thick and bay is 9.5 mm thick, I know cage in bay has both holes from bottom and side screws, but i don't know if 7mm and 9mm drives have screws in exactly the same place relatively to bottom part of drive and sata interface. I dont know if location of sata and power connector is the same. What I found on internet are 2 contradicting things. So I am not able to find help on Corsair forum, very nice, I will ask competition, but I will buy competition if they provide answer. Link to comment Share on other sites More sharing options...
Yellowbeard Posted August 28, 2013 Share Posted August 28, 2013 The drives have the information you need. They conform to the proper form factor that any other SSD or 2.5" HDD does and have the same 8 mounting holes that all of them have. The only difference is the height, 7mm vs 9.5mm. The connectors are the same and located in the same place. Link to comment Share on other sites More sharing options...
INeedToLiveLong Posted August 29, 2013 Author Share Posted August 29, 2013 The drives have the information you need. They conform to the proper form factor that any other SSD or 2.5" HDD does and have the same 8 mounting holes that all of them have. The only difference is the height, 7mm vs 9.5mm. The connectors are the same and located in the same place. Thank you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.