Herethos Posted August 19, 2013 Share Posted August 19, 2013 The pump was pretty much non noticable at first but now a few hours later its quite loud. Temps are around 32-35C idle, and it only goes up about 20C when I run Prime95 for a while so obviously it is cooling. Also I can't get the Corsair Link2 to detect the pump and fans so I can try lowering the pump rpm a bit. I'll attach some screenshots of what it says in devices. It says Unspecified Integrated USB Bridge. http://i.imgur.com/8H7WoSf.png http://i.imgur.com/SkkEqzb.png http://i.imgur.com/e60WcjB.png Note it says this device is functioning correctly. Shouldn't it say Corsair h100i or something, instead of USB-Device? Also if required I can sample the pump noise. Edit: Added Corsair Link2 screens: http://i.imgur.com/yRVeKEZ.png http://i.imgur.com/SweNNfV.png Link to comment Share on other sites More sharing options...
wytnyt Posted August 19, 2013 Share Posted August 19, 2013 pump rpm cant be changed,can you posts pics of what your link shows? Link to comment Share on other sites More sharing options...
gasolin Posted August 20, 2013 Share Posted August 20, 2013 Pump rpm can be changed with a H100i Link to comment Share on other sites More sharing options...
wytnyt Posted August 20, 2013 Share Posted August 20, 2013 Pump rpm can be changed with a H100i no it cannot,its fixed ~2200 rpm,the fans can be tho... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.