Jump to content
Corsair Community

CMT6GX3M3A1866C9 XMP Crash GA-X58A-UD5 Rev.2.0


Bohne02

Recommended Posts

You need more QPI if your going to try for 1866mhz with that MB/CPU. Start out at 1.35 and you can go as high as 1.45v QPI voltage if you need to. But only add what you need to make it stable.

 

If you can not get 1866mhz to run at those settings , then you'll need to reduce the frequency to 1600mhz and see if it is stable at that speed.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...