thaguy Posted August 16, 2013 Share Posted August 16, 2013 I have recently bought a corsair h80 from Craigslist and i brought it home and installed it just like it says in the box and the leds on the pump are out but it seems to be working fine i can hear the pump but when i do a Prime 95 it slowing moves up to like 70 and i shut it off. i have taking it off three times and reapplied thermal paste im using the Arctic Sliver which i heard was really good,please help figure this out i just sent back my h60 and bought this one thinking it would work better, case:thermaltake commander motherboard:Msi 760-p23 (fx) CPU:Fx 6300 @3.5ghz Ram:hyper x and corsair both 1600mhz Link to comment Share on other sites More sharing options...
Toasted Posted August 16, 2013 Share Posted August 16, 2013 What is the pump RPM (You can see this in the BIOS)? Link to comment Share on other sites More sharing options...
Synthohol Posted August 16, 2013 Share Posted August 16, 2013 Arctic Silver takes about 100 hours to cure and you may just not be giving it enough time to do its job. also is the cpu voltage at 1.5v? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.