Necrus Posted August 15, 2013 Share Posted August 15, 2013 Hi all. AX-860i problem. PSU new. Monitoring in Corsar Link: Main 227-228V 24 pin ATX 12V=11,91-11,92 12 V perephial = 11,91-11,92 When i start Furmark sometimes 11,89V and 11,94 V. I hope 24 pin ATX 12V=12V and 12 V perephial=12V? Aida64 monitor 12V=11,89 Is that normal? Or problem with programm monitoring? My PC: Asus M5A99x rev. 1; FX 8350 (200x22, Vcore=1.40);Cooler Master Hyper 212 plus (+Thermalright TY-143); 2х4Gb Corsair XMS 3 CMX8GX3M2A1600C9 (1866 1.65v 9-10-9-27) Sappgire 7970 Vapor-X 3 gb Corsair Corbide 400r Corsair AX-860i (80+Platinum) 2хThermalright 140(top exhaust) + Scythe Slip Stream 140+Xilence 120mm+Arctic F12(intake) Link to comment Share on other sites More sharing options...
Necrus Posted August 15, 2013 Author Share Posted August 15, 2013 ATX standart 5%, i have 1% lower. I really hoped that I was buying the King Kong of PSUs below 1000W... Help me Link to comment Share on other sites More sharing options...
peanutz94 Posted August 15, 2013 Share Posted August 15, 2013 ATX standart 5%, i have 1% lower. I really hoped that I was buying the King Kong of PSUs below 1000W... Help me 24 pin ATX 12V=11,91-11,92 12 V perephial = 11,91-11,92 When i start Furmark sometimes 11,89V and 11,94 V. I hope 24 pin ATX 12V=12V and 12 V perephial=12V? That would be 11.4v to 12.6v. Your voltage looks fine. Besides you can not trust the software for accurate readings. Putting a meter on it is the only way to get true readings. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.