roesen Posted June 29, 2013 Share Posted June 29, 2013 So recently my K90 has decided to write double letteers (letteers letters damnit) As you can see this happens mainly on the E, B and N buttons. (eeven quadruple letters sometimes) I'm getting sick of this keyboard creating problems for me, not only was it a pain in the *** to install the thinng, but thee P-button has no LED, and now I can't even type comfortably any more. Come onn guys, get your **** together. I'm not gonna edit out the doublee letters in this post. Link to comment Share on other sites More sharing options...
Toasted Posted June 30, 2013 Share Posted June 30, 2013 Have you tried reflashing the firmware? FW 1.31 should fix the key repeat issue. As for the L.E.D. you can request an RMA to replace the keyboard. Link to comment Share on other sites More sharing options...
roesen Posted July 1, 2013 Author Share Posted July 1, 2013 I've installed the latest firmwaree (FW 1.31) and I still have the same problem. Link to comment Share on other sites More sharing options...
ArjenP Posted July 2, 2013 Share Posted July 2, 2013 I had this problem aswel so i tried to update to 1.36 and now it died:S Link to comment Share on other sites More sharing options...
Toasted Posted July 2, 2013 Share Posted July 2, 2013 @roiesen The latest FW is 1.36, Update it and see if the issue is present. If it is, try the keyboard on another computer and see if it does the same thing. @ArjenP If the keyboard not being detected, request an RMA to replace it. Link to comment Share on other sites More sharing options...
ArjenP Posted July 2, 2013 Share Posted July 2, 2013 The keyboard does get recognized as kbd bootloader. But as soon as i replug it into my pc it is working fine again. It wont update to 1.36 though and i allready tried the solution in the sticky thread on this forum. I probably won't rma it for this i think, unless the problems are getting worse. It does not happen too often that the keys 'stick' Link to comment Share on other sites More sharing options...
roesen Posted July 2, 2013 Author Share Posted July 2, 2013 Downnloaded and installed FW 1.36, seeems like it's not working properly. Is reboot required? Link to comment Share on other sites More sharing options...
Toasted Posted July 3, 2013 Share Posted July 3, 2013 @ArjenP What happens when you follow the sticky? @resen Try the K90 on a different computer and see if the letters still repeat it self. If it does, request an RMA to replace the keyboard. Link to comment Share on other sites More sharing options...
ArjenP Posted July 3, 2013 Share Posted July 3, 2013 @Toasted At the point where i had to remove the HID driver, kbd bootloader was still there (according to the guide it should be gone then) So i replugged it in the same usb ports and it was fully working again on 1.31. According to the flash tool it cannot get into flash mode so i guess just nothing happens. Link to comment Share on other sites More sharing options...
Toasted Posted July 3, 2013 Share Posted July 3, 2013 If your original issue "repeating keys" is still present, you can request an RMA to replace the keyboard. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.