Frodcord Posted June 26, 2013 Share Posted June 26, 2013 My PC has been turning off and my Graphics card is unstable as well, i took the PC out of the case and i noticed that the 24-pin connector/cable is the problem because unless it is in a certain position the PC would not turn on and if you move the cable a little bit while the PC is on it shuts down. The mesh that covers the cable is perfectly fine, i submitted a ticket last week and Corsair hasn't responded after 5 business days. Link to comment Share on other sites More sharing options...
peanutz94 Posted June 26, 2013 Share Posted June 26, 2013 My PC has been turning off and my Graphics card is unstable as well, i took the PC out of the case and i noticed that the 24-pin connector/cable is the problem because unless it is in a certain position the PC would not turn on and if you move the cable a little bit while the PC is on it shuts down. Look carefully around the plug. A broken or looose socket on the MB will act the same way. Link to comment Share on other sites More sharing options...
Frodcord Posted June 26, 2013 Author Share Posted June 26, 2013 First i thought my motherboard was the problem because it had a bent pin, so i bought a new motherboard and the problem is still there. Link to comment Share on other sites More sharing options...
peanutz94 Posted June 26, 2013 Share Posted June 26, 2013 That would pretty much rule that out then! :) At any rate you may want to give CS a call by phone. If you are out of the US or overseas, using SKYPE makes it a free call from anywhere in the world. Hours of operation are posted at the top of the forums if time difference is a concern. They would be able to take care of you in just a few minutes instead of waiting on the automated system. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.