fillobotto Posted June 10, 2013 Share Posted June 10, 2013 I'm planning to watercool a 600T, only a cpu loop. I'd like to put a 240mm radiator on the top inside of the case. The problem is that I need a very thin radiator. Is there somebody who can tell me ehich rad will fit assuming that I'm going to put the fans outside of the case? Link to comment Share on other sites More sharing options...
Synthohol Posted June 10, 2013 Share Posted June 10, 2013 these are 30mm thick: http://www.frozencpu.com/products/15664/ex-rad-373/Alphacool_NexXxoS_ST30_Full_Copper_Slim_Profile_Dual_120mm_Radiator.html?tl=g30c95s160 http://www.frozencpu.com/products/12702/ex-rad-227/Magicool_Extreme_Dual_120mm_Radiator_-_Slim_Profile_LC-RADI240.html?tl=g30c95s160 This one is 29.6mm: http://www.frozencpu.com/products/4083/ex-rad-84/Black_Ice_GT_Stealth_240_Radiator_-_Black.html?tl=g30c95s160 Link to comment Share on other sites More sharing options...
fillobotto Posted June 10, 2013 Author Share Posted June 10, 2013 these are 30mm thick: http://www.frozencpu.com/products/15664/ex-rad-373/Alphacool_NexXxoS_ST30_Full_Copper_Slim_Profile_Dual_120mm_Radiator.html?tl=g30c95s160 http://www.frozencpu.com/products/12702/ex-rad-227/Magicool_Extreme_Dual_120mm_Radiator_-_Slim_Profile_LC-RADI240.html?tl=g30c95s160 This one is 29.6mm: http://www.frozencpu.com/products/4083/ex-rad-84/Black_Ice_GT_Stealth_240_Radiator_-_Black.html?tl=g30c95s160 Thank you, but they will fit for sure? Any 600T owner? Link to comment Share on other sites More sharing options...
Synthohol Posted June 10, 2013 Share Posted June 10, 2013 the rads will fit but depending on the chipset coolers on your board will determine everything. you did not fill out your specs as per registration so we cant help you unless you tell us what board is going in. then i/we can look at the pics of the MB an see what is at the top of the board and guess if it will interfere. thanks. Link to comment Share on other sites More sharing options...
fillobotto Posted June 11, 2013 Author Share Posted June 11, 2013 the rads will fit but depending on the chipset coolers on your board will determine everything. you did not fill out your specs as per registration so we cant help you unless you tell us what board is going in. then i/we can look at the pics of the MB an see what is at the top of the board and guess if it will interfere. thanks. Done, there are all my specs now. Plus this is three photo of my case: http://imgur.com/D8LflOc,cPdsmgW,5J460dC I'm sorry for the quality but, even my mobile is supposed to have a good camera, it takes weird pictures indise my case... What worries me is the 8-pin connector, while other thing shouldn't be a problem. Link to comment Share on other sites More sharing options...
wytnyt Posted June 11, 2013 Share Posted June 11, 2013 i tried looking at your pics to judge the clearance but their shot too close to make an assessment.i only see one area where there should be enough room but a pic not so close should help. Link to comment Share on other sites More sharing options...
fillobotto Posted June 12, 2013 Author Share Posted June 12, 2013 i tried looking at your pics to judge the clearance but their shot too close to make an assessment.i only see one area where there should be enough room but a pic not so close should help. Ok then, theese are mush better: http://imgur.com/NO0nZSD,8AfSmEx,k63nZyF Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.