BrainScan Posted June 9, 2013 Share Posted June 9, 2013 I just booted up my computer and got a CPU Fan error! When I open the case and try to boot I can see the H100i LED turn on for a second and then go out again. The same with the fans that are connected. They start to spin up and then stop. I tried to disconnect everything connected to the pump and then only connect the essential stuff (power and rpm cable) but the behavior is the same. Is there anything else I can do or is my unit just dead? Link to comment Share on other sites More sharing options...
wytnyt Posted June 9, 2013 Share Posted June 9, 2013 you arent being ignored,someone will help with your problem as soon as your post is seen id help but dont have a accurate enough answer. you can in the mean time bypass the cpufan on the hydro and just plug a fan in the cpufan on the m/b and see it allows it to boot.i know the cpufan error can stop booting so perhaps this may help. Link to comment Share on other sites More sharing options...
Toasted Posted June 10, 2013 Share Posted June 10, 2013 If you have recently purchased the cooler, contact your seller and ask if they can replace the cooler for you. If not, request an RMA to replace it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.