E-ric Posted June 7, 2013 Share Posted June 7, 2013 I have two mpc655 pumps, pwm version connected to one strip going into the psu..is this save or do I need to divide them between cables? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 7, 2013 Corsair Employees Share Posted June 7, 2013 I am sorry but I have no idea what an mpc655 pump is but you dont want to draw more than 18 amps from one 4 Pin Molex dongle. Link to comment Share on other sites More sharing options...
sotiris.bos Posted June 7, 2013 Share Posted June 7, 2013 Swiftech mcp655 water cooling pump. The specs sheet at the swiftech website reports 2 amps nominal current at 12 volts with a molex 4-pin so i guess he is ok at 4 amps? Link to comment Share on other sites More sharing options...
E-ric Posted June 7, 2013 Author Share Posted June 7, 2013 This is the pump http://www.frozencpu.com/products/17549/ex-pmp-214/Swiftech_MCP655-PWM-DRIVE_12v_Water_Pump_Module_-_PWM_Enabled_Single_Version.html?id=99XZ2mh8&mv_pc=145 So i should be fine with two of these connected on one cable? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 7, 2013 Corsair Employees Share Posted June 7, 2013 Yes that should not be a problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.