dawild Posted June 4, 2013 Share Posted June 4, 2013 Hi, I just made a RMA last week for my TX750(v1). I have a Coil Whine Noise with that PSU and a very Loud Fan in there, so i decided to RMA it, and there we go, My RMA is: 6026065 . I just received my New TX750V2 today! It was fast corsair and thanks you for this! But i think, i have a little problem with my replacement, i looked around in this forum, and the fan is monitored with the temp/usage ratio. Actually, my PSU Fan is always running at High RPM with a paperclip test, tried on a low end system (i3, igpu, 1hdd) and the same problem occurs, the PSU is LOUD at high RPM, and never monitor... the serial number of my new unit, i replied on the ticket online, so you can see it! Do i have a problem there RAMguy? Thanks for your help! Link to comment Share on other sites More sharing options...
peanutz94 Posted June 4, 2013 Share Posted June 4, 2013 If you have replied to your ticket in the RMA system then that is all you should need to do. Any other correspondence between you and Corsair can be found there. But yes, that PSU should not be spinning at full speed all the time. Just complete the RMA process to have it replaced. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.