Jump to content
Corsair Community

PC3200 compatible on a P4C800 at 533FSB?


RealWild1

Recommended Posts

Ok, I mentioned this in a previous posting of mine, but it was never answered. If I'm running a 533Mhz FSB cpu on an Asus P4C800, can I run dual channel DDR 400 RAM without any troubles or under/overclocking? If not, I've looked around and am having an interesting time finding matched DDR 333 modules, so any direction on that would be appreciated as well. I'm not really interested in overclocking anything, so I'd prefer things to run at factory speeds.
Link to comment
Share on other sites

  • Corsair Employees

Sorry, but no! With a 533FSB CPU only DDR333 would be supported with this chipset! However, you can over clock your CPU and then run the memory at DDR400!

With the memory Frequency set to DDR333 and a 533 FSB CPU that would make the divider setting 4-5 so if the CPU Freq. is 160 MHz that would run the memory at DDR400, if your CPU will O.C. that high!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...