900D Bottom width rad space size

[florre]

what are the dimensions (cm) in the bottom of the 900d case from left to right?

i know it fits a 480 and 240, i just need to know the width so i can choose correctly which rads and how to do push or pull.

 

 

thanks.

[deees]

what are the dimensions (cm) in the bottom of the 900d case from left to right?

i know it fits a 480 and 240, i just need to know the width so i can choose correctly which rads and how to do push or pull.

 

 

thanks.

 

Can you be more specific?

 

The "rough opening" is 55cm, see photo:

http://imageshack.us/a/img545/9396/capture00467.th.jpg

 

If you can point out exactly the areas you're interested in, I can try to get you those dimensions.

[florre]

Can you be more specific?

 

The "rough opening" is 55cm, see photo:

http://imageshack.us/a/img545/9396/capture00467.th.jpg

 

If you can point out exactly the areas you're interested in, I can try to get you those dimensions.

 

if left to right is 55cm, i need to know how much up to down is, when looking at the picture, to know how think my radiators can be.

[deees]

if left to right is 55cm, i need to know how much up to down is, when looking at the picture, to know how think my radiators can be.

 

OK, now I think I have it.

 

The width of the case, (from the front), measured from radiator mount to radiator mount is: 222mm

http://imageshack.us/a/img849/802/radwidth.th.jpg

If you mount a single PSU, part of the space is down to 120mm.

You should watch Tom’s video review over at OC3D http://www.overclock3d.net/reviews/cases_cooling/corsair_obsidian_900d_review/1

He covers everything about the case, (except how to correctly remove the filter on the top.) A little after the 32min. mark, he runs through probably every variation to radiator/push/pull fan configuration possible.

[florre]

okay thanks A LOT!!