Jump to content
Corsair Community

V2000 - Irritating noise when plugged in


charlesprofe

Recommended Posts

This happens since I bought this headset:

 

When I plug in the headset to the USB to recharge them, i can hear an irritating noise if and only if the mic is down(and activated).

 

The noise is heard in both the microphone output and the headset.

 

If unplug them or deactivate the mic the noise disappear and if I touch the case, the noise softens.

 

PD: It never happened on my old headset.

Link to comment
Share on other sites

Have you tried a different USB port? Does it do the same?

Plug the headset into a different computer and see if the issue is still there.

Check the sample rate for the headset and Microphone and make sure its on 44100Hz.

Link to comment
Share on other sites

Thank you for answering.

Yes, I tried on all USB of my computer - both 3.0 and 2.0 - before posting. Still there on all of them.

Tried just now on another computer. Same issue (even louder).

The sample rate... In Control Panel the speaker was a 48MHz, but i changed it to 44.1. The micro was already at 44.1. Same issue :sigh!:

 

PD: Just tried, if i disable microphone "by software" the noise is still there. I can only get rid of it is by removing the cable or up the microphone until it disables "by hardware".

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...